raised supercharger top

m_eppard

Registered User
I have installed a raised supercharger top and now have an alinement problem with intercooler tubes. Any one have any tips for this problem. THANKS
 
I have installed a raised supercharger top and now have an alinement problem with intercooler tubes. Any one have any tips for this problem. THANKS


Loosen the upper tube at the IC and it should twist a little so it angles up a little better to the top.

Ken
 
Undo the top and bottom tubes on the intercooler, then put on the top tube to the raised top. Then you should be able to move the intercooler so you can hook up the top and bottom tubes.
 
I have installed a raised supercharger top and now have an alinement problem with intercooler tubes. Any one have any tips for this problem. THANKS

With the raised top, you will not be able to use the bolt that secures the upper IC tube to the accesory bracket...remove it then do as the others suggest about alignment and tightning.

What are you using to reseal the IC tube ends and the raised top ?

David
 
Back
Top