392Bird
Registered User
I have never ran mine in the 1/4, since I was not comfortable doing it with the stock disk/drum brakes. (I went off the end of the strip in 85, and spent 1 month in the hospital). I just completed upgrading the brakes, so hope to make a few passes in the Spring after upgrading the fuel system again. It was just starting to run out of fuel pump during the last trip at one of local 1/8 mile strips. I am replacing the head gaskets from that now.
Turned 6.22 @ 109 in the 1/8th, so should be some where in the upper 9s in the 1/4.
I wanted to do some extra light weight brakes, but did not fit my budget, or would not fit with the 15 inch skinnies.
http://members.tccoa.com/392bird/brakes.htm
Starting on the Head gaskets this morning.
Turned 6.22 @ 109 in the 1/8th, so should be some where in the upper 9s in the 1/4.
I wanted to do some extra light weight brakes, but did not fit my budget, or would not fit with the 15 inch skinnies.
http://members.tccoa.com/392bird/brakes.htm
Starting on the Head gaskets this morning.