what are these codes?(video)can you help tell me them

92sclikenew

Registered User
<object width="800" height="700"><param name="movie" value="http://www.youtube.com/v/fA1d02SPUCk&hl=en_US&fs=1&color1=0x2b405b&color2=0x6b8ab6&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/fA1d02SPUCk&hl=en_US&fs=1&color1=0x2b405b&color2=0x6b8ab6&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>

can someone tell me these codes im havin trouble picking them up.
 
hmm i have never seen one beep that slowly.

the first time I listned i got

33
13
then there is a 3 at the end.

the second time i listned I thought I got different numbers.
 
hmm i have never seen one beep that slowly.

the first time I listned i got

33
13
then there is a 3 at the end.

the second time i listned I thought I got different numbers.

yea im kind of confused thanks for helping anyone got an idea? this is my first time dealing with obd1.:eek:
 
Umm, sounds like 111, or no codes detected. You testing an early or late model? Also, how about using the paperclip method of counting the CEL flashes on the dash?
 
I get 33, a separator code, and a 33. So a temp 33, then a stored 33.

33 is "EGR Valve Position Sensor" failure.

I'd bet a good cleaning - or a replacement of - the EGR valve would not be amiss, then a code clear, and then a run to see if it goes away.

RwP
 
I get 33, a separator code, and a 33. So a temp 33, then a stored 33.

33 is "EGR Valve Position Sensor" failure.

I'd bet a good cleaning - or a replacement of - the EGR valve would not be amiss, then a code clear, and then a run to see if it goes away.

RwP

car is a 92 no egr

i believe they are
111 111

xr7dave is helpin me out. :D
 
Huh. Sweetie's '91 has EGR on it.

111 is another possibility, true. Any "Check Engine" lights inside? If so, then "111" isn't it. If not, then "111" is probably it ;)

RwP
 
Huh. Sweetie's '91 has EGR on it.

111 is another possibility, true. Any "Check Engine" lights inside? If so, then "111" isn't it. If not, then "111" is probably it ;)

RwP

yea no engine light is on but there is alot more going on then this im sure.

it wont complete the koer test

<object width="660" height="525"><param name="movie" value="http://www.youtube.com/v/k-zwBP-uMUk&hl=en_US&fs=1&color1=0x2b405b&color2=0x6b8ab6&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/k-zwBP-uMUk&hl=en_US&fs=1&color1=0x2b405b&color2=0x6b8ab6&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>
 
Last edited:
Did you get the first set of codes figured out? I'm getting the exact same slow codes.
Thanks
Jake
 
I got a cde 111 as well. On my 92 when all is good I get a code 111. Even when I ran out of gas during test doh :eek: I need to rerun to make sure. Maybe I'll go do that now.
 
Back
Top