Looking for Aluminum Radiator

Jegs has some cheap if you don't mind making your own mounts...probably have to use with a FMIC though.

I think radiator express has (or had) some in the stock configuration too..might be wrong on that one though.
 
what size core should I be looking at on the Jegs site. As for RE, the one they sale will not support my hp. I'm making over 400hp whp. My 3 core brass chills the engine fine however it can't handle the heat load of the condensor when the ac is on. Slowly creeps to overheating point when idling with ac on.

I found this on ebay, sizes seem about right. really hope its a true 3 inch thick unit. Most of the universal 2 cores I'm seeing are 2 1/4 thick. It should fit I just need to make mounts and pump the coolant right


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=400140035911&viewitem=&sspagename=STRK%3AMEWAX%3AIT

the griffin rad from summit is

http://www.summitracing.com/parts/GRI-1-56182-X/
 
Last edited:
I have one with about 200-300 miles on it that I got from Radiator Express if interested...from my '95
 
Back
Top