Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Who needs miscellaneous parts??? I need the space in my garage!!!

  1. #1
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429

    Arrow Who needs miscellaneous parts??? I need the space in my garage!!!

    Hi gang!

    The Winter is almost here again, and if I don't make room for my wife's car to park inside the garage, I'll be stuck leaving my Super Coupe outside instead. I've got an assortment of spare parts, some of which have come off my '90 Super Coupe, and others that I obtained from an '89 Super Coupe that I parted out this past year. Most of this stuff is in really good shape. Please take a moment to review the list, and if you're interested in anything please let me know ASAP.

    Rear Bumper Cover, Red, $150 (tentatively sold to Les Borda)

    Side Skirt Kit, Red, missing the metal panel for the bottom of the driver's door, $75 (tentatively sold to T1Bird (Bruce))

    Hood, Black, Including Hinges, will need minor bodywork, but little to no rust on it, $50

    Door Sill Trim Plates, Black, Left and Right, $35 for the pair

    Two SuperCoupe Rims Off '89 SC, Complete with Centre Caps, $70 for the pair (tentatively sold to Steve Richards)

    One SC Spare Tire (Doughnut), with the Billet Aluminum Rim, $50 (tentatively sold to Mike Maroschak)

    Used Rear Calipers, Left and Right (good for cores or home rebuild), $30 for the pair

    Used Front Calipers, Left and Right (good for cores or home rebuild), $30 for the pair

    Used A/C Lines Off '89 SC, $15 each (cond to evap line sold, but the other is still available)

    Clutch and Brake Pedal Assy's (From 5-spd car), $50 (tentatively sold to Ed Nicholson's friend)

    Clutch Reservoir with Cap, $15 (tentatively sold to Ed Nicholson's friend)

    Hand Brake Assy in good condition, $35 (tentatively sold to T1Bird (Bruce))

    Coolant Reservoir Off '89 SC (with hole for Coolant Level Sensor), $20

    5-spd Transmission Cross-member (Off '89 SC), $15

    Half-shaft (not a 'fat shaft') Off '89 SC, $25

    I also have other odds and ends, so if you're searching for something in particular and it's not listed above, please don't hesitate to ask. All prices listed are in CDN funds. These parts are available immediately on a 'cash and carry' basis. I'm not interested in having to ship these parts all over North America, thus I have not listed these items under the general classifieds board.

    Best regards,

    Sean
    Last edited by SeanMatteson; 10-24-2002 at 06:44 PM.

  2. #2
    Join Date
    Jun 2002
    Location
    Mississauga, Ontario, Canada
    Posts
    449
    Sean, I'll take a look at the rims.

    PS I did not take the tb or ip home.
    1989 SC Auto "Quick-silver"
    1990 SC 5 speed - 35th Anniversary

  3. #3
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    OK, Steve. I'll have to take another look around the garage to see if I can spot this vanishing TB.

    Cheers,

    Sean

  4. #4

    Question Did you get my PM?

    ?

  5. #5
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    Mike,

    I did get your message. I'll consider that spare wheel tentatively sold to you. We'll have to see what we can do about getting together ASAP so you can have it. Do you ever get out to Hamilton? Alternatively, where are you at? If I'm out in your area, I could drop the wheel off.

    Cheers,

    Sean

  6. #6

    Post info

    I'm in Oakville. With working on the garage every spare moment, I don't get out anywhere anymore!

  7. #7
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    Mike,

    Is your place easy to get to from the QEW? I'll be traveling through Oakville this evening on the way to the meet at Hooters.

    "If ya gots da money, I gots da wheel!"

    Cheers,

    Sean

  8. #8
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    It appears Mike went offline before he saw my reply. Does anyone have Mike's phone number? If you do, would you please email or PM it to me so that I can call him.

    Thanks in advance,

    Sean

  9. #9
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    Updated 10/19/02!!!

  10. #10
    Join Date
    Apr 2002
    Location
    Toronto, Canada
    Posts
    3,809
    I see a lot of "tentative" sales.

    WHERE-BE da MONAY!

    j/k.

  11. #11
    Join Date
    Apr 2002
    Location
    Brantford, Ontario, Canada
    Posts
    4,004
    Sean, Bring out that wheel to the dyno on wed. I'll drop it off at Mike's for you. He is near me.

    Do you have any sway bars??
    I've got less on my Cugar then have in your garage!!

  12. #12
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    Ryan,

    Mysteriously, the rear sway bar was missing on that car when it got to my place.

    ...I'm sure you've got more spare parts than me. Maybe you just haven't taken them off the car(s) and inventoried everything yet?!

    Best regards,

    Sean

  13. #13
    Join Date
    Apr 2002
    Location
    Brantford, Ontario, Canada
    Posts
    4,004
    No, No, I have the from the cugar off, but I have more demand than supply on this one my friend.

  14. #14
    Join Date
    Apr 2002
    Location
    West Flamborough, Ontario, Canada
    Posts
    5,429
    ...Don't complain about that! It's better to have the cash in your pocket than the pile of parts in your garage. I'm hoping to just keep the stuff that I want spares of, like motor, M5R2, pumpkin, etc.

    Cheers,

    Sean

  15. #15
    Join Date
    Jun 2002
    Location
    GTA
    Posts
    238
    Sean,

    about that hood you gots,what kind of body work is needed? I'm in the market for a hood, and your price is just right.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •