Good Seller:Shoalcracker

sc4u2nv

Registered User
Name:paul Wark
Email Address: paul.wark@rogers.com
User Name: Shoalcracker
Vendor/Individual: Individual




Just a thank you to Shoalcracker so the other SCCoO/SCCoA members know! I bought an MPX fully assembelled blower, 75mm TB, and a 76mm mafs for the 94' sc at a great price and I have to say that he was very good to deal with and got the parts sent to Minnesota in a week. I cant wait till the snow melts so I can get her on the road again..
Keep those goodie parts comin Shoal!!

Thanks again Paul,

Joe/ SC4U2NV
 
Last edited:
Tks for the kind comments.

I have another combo that may work for some;

Late Model Blower Ported to known template with smiley
Uncoated Rotor Pac with Solid Coupler
Polished MP Plenum
Polished 3" Hat
SCP 10% Pulley
Dayco Gold 39" belt
KW Dbl Intercooler/fan and 3 spd switch

Willing to port match and smooth.

If mated to a 5 spd, stock internals, 3" CAI, 60lb injectors and 76/75 combo I could also supply a tuned SCT Chip and ECU.

Pulls thru 4800-5100 and have shifted at 5700.

PS Testing was done on a motor with 70,000 miles.

Paul
 
What's going on Paul? you are selling all your toys? Are you getting an AR? Or getting out of SC fever?
 
SC Fever

D

I've got 3-4 mths to look at the options and I've already invested 6 weeks.

Its going to take $ to get it off the drawing board.

I figure worse case is stock which is fine- "FOR NOW"

I'll be Auto this year to compensate for a lack of 5 spd talent.

From stock everything I do is going to ring up the $.

I'm beefing up the bottom end on the other motor with new rods and rebalancing as a just in case starting point.

Paul
 
Back
Top