SeanMatteson
Registered User
My blower is getting more and more noisy, so it's high time for a rebuild (and maybe a little porting). I've asked around and come up with the following parts list:
Qty Part Number
Required
(ea)
2 Bearing, Needle, INA #FC65477.1
1 Bearing, NSK #NC6203C3X28,
(#6203DDU8AC3EX28)
1 Bearing, NSK #NC6204C3X28,
(#6204DDU8AC3EX28)
1 Seal, Chicago Rawhide #7968
1 Loctite Gasket Eliminator 518, #51831
1 Husky Grease, #00603
I'm still looking for a part number for the two bearings that go on the rotor shafts between the drive gears and the rotors themselves. It's rumoured that the NSK #6203DDU8AC3EX28 bearings are used here as well, but I'd like to be sure before I order the wrong parts. Apparently, there are a couple of seals that go into the cartridge near these bearings, and I need part numbers for those. Also, if anyone knows the appropriate part number for the '93+ style spring-loaded couplers, I'd like to swap a new one into my '90 blower during the rebuild.
A new technical article might be in order!
Thanks in advance,
Sean
Qty Part Number
Required
(ea)
2 Bearing, Needle, INA #FC65477.1
1 Bearing, NSK #NC6203C3X28,
(#6203DDU8AC3EX28)
1 Bearing, NSK #NC6204C3X28,
(#6204DDU8AC3EX28)
1 Seal, Chicago Rawhide #7968
1 Loctite Gasket Eliminator 518, #51831
1 Husky Grease, #00603
I'm still looking for a part number for the two bearings that go on the rotor shafts between the drive gears and the rotors themselves. It's rumoured that the NSK #6203DDU8AC3EX28 bearings are used here as well, but I'd like to be sure before I order the wrong parts. Apparently, there are a couple of seals that go into the cartridge near these bearings, and I need part numbers for those. Also, if anyone knows the appropriate part number for the '93+ style spring-loaded couplers, I'd like to swap a new one into my '90 blower during the rebuild.
A new technical article might be in order!
Thanks in advance,
Sean