Results 1 to 14 of 14

Thread: RAM 10.5" Clutch kit

  1. #1
    Join Date
    Dec 2008
    Location
    Virginia Beach, VA
    Posts
    105

    RAM 10.5" Clutch kit

    Includes Pressure Plate, Clutch Disc, and alignment tool. This is a 10 spline kit. $100 + shipping.

  2. #2
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Is it new? Will it work on a 91 sc with a light weight flywheel? I'm very interested. Is it the oe clutch or the HD clutch.

  3. #3
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Does any one know if this clutch will fit a sc.

  4. #4
    Join Date
    Dec 2008
    Location
    Virginia Beach, VA
    Posts
    105
    Quote Originally Posted by r1dd1ck913 View Post
    Does any one know if this clutch will fit a sc.
    Just verified that the M5R2 has a 10 spline input shaft, so it should.

    Also for reference yes it is an HDX clutch kit (Stage 2) Capable of holding 450+ HP
    Last edited by '95Cougar_XR-7; 12-25-2011 at 03:22 PM.

  5. #5
    Join Date
    Feb 2005
    Location
    Jacksonville, NC
    Posts
    489
    Quote Originally Posted by r1dd1ck913 View Post
    Is it new? Will it work on a 91 sc with a light weight flywheel? I'm very interested. Is it the oe clutch or the HD clutch.
    it will work with the flywheel you bought. any 10 spline 10.5 clutch surface will work.

  6. #6
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Justin I think I bought the flywheel from you so if you say it will work that's good for me. So is there a difference between the surface of the 11 inch vs the 10.5? And just to make sure the bolt pattern for the 10.5 and the 11 are the same.

  7. #7
    Join Date
    Dec 2008
    Location
    Virginia Beach, VA
    Posts
    105
    Soldddddddddddd.

  8. #8
    Join Date
    Feb 2005
    Location
    Jacksonville, NC
    Posts
    489
    Quote Originally Posted by r1dd1ck913 View Post
    Justin I think I bought the flywheel from you so if you say it will work that's good for me. So is there a difference between the surface of the 11 inch vs the 10.5? And just to make sure the bolt pattern for the 10.5 and the 11 are the same.
    Only difference is the extra half an inch surface on the flywheel. You can use a tape measure and measure it across the surface of the flywheel and see that its only 10.5 wide.

    As for the bolt pattern, I could bolt my stock 11 inch pressure plate to the 10.5 flywheel.

  9. #9
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Thanks for the info. I am going to give it a shot.

  10. #10
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Well just so every one knows this clutch will not work on a SC flywheel. The pressure plate will not bolt up and the friction surface is larger on the flywheel then it is on the clutch.

  11. #11
    Join Date
    Feb 2005
    Location
    Jacksonville, NC
    Posts
    489
    Quote Originally Posted by r1dd1ck913 View Post
    Well just so every one knows this clutch will not work on a SC flywheel. The pressure plate will not bolt up and the friction surface is larger on the flywheel then it is on the clutch.
    Measure across the surface of clutch, if the flyhweel surface is larger than the clutch, than the clutch he sold you is not a 10.5 clutch kit.

    Why doesn't the pressure plate work?

  12. #12
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Well lets see.




  13. #13
    Join Date
    Feb 2005
    Location
    Jacksonville, NC
    Posts
    489
    i dont get it. my stock 94/95 clutch was bigger than the acutal flywheel surface, but my stock pressure plate bolted right up. i really wished i kept my old clutch and pressure plate. i do have my flywheel.

    when you get that 5 spd SC apart, see how the 91 stock parts bolt up.

    figured it out. 89 to 93 had 11" surfaces, the 94/95 had 11.5" surface. your goin to need a 11" clutch set-up.

    just return the clutch get a 11" from supercoupe performance.
    Last edited by Justin89SC; 01-02-2012 at 11:31 AM.

  14. #14
    Join Date
    Aug 2011
    Location
    Kansas City, KS
    Posts
    1,141
    Yea it's all good I got my money back out of the 10.5 clutch. I can't wait to get the right clutch. I almost have every thing out of the 91 parts car. All that is left is the motor and tranny. I have already started putting some of the stuff on the car I am converting to a 5 speed.

Similar Threads

  1. Clutch draging issues Stock or Spec?
    By RichM in forum Technical Forum
    Replies: 29
    Last Post: 11-18-2004, 10:52 PM
  2. clutch fluid problem...
    By stephens89sc in forum Technical Forum
    Replies: 6
    Last Post: 06-01-2004, 08:07 PM
  3. clutch question???
    By aplvlydrtybird in forum Technical Forum
    Replies: 13
    Last Post: 02-01-2004, 08:29 PM
  4. LUK clutch kit installed in my 95.
    By NorthrnSCownr in forum Technical Forum
    Replies: 0
    Last Post: 11-10-2003, 04:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •