BirdofPrey97
Registered User
Working with P.E.M. vendor named Randy for a group buy and the prices vary a bit between the AOD/M5R2 and the 4R70W due to the difference in the Slip Yoke prices.
Below is the information I was sent on the group buy.
Here is the information on the 3.5" Aluminum 1330 Drive Shafts for your group club buy.
item # description racerprice buy10 buy20
The drive shaft slip yokes will be installed and the assembly balanced. The parts used are
the same as the Ford Motorsports Driveshaft (OEM Quality). Please check the transmission
rear seal diameter for the slip yokes.
The U-Joints will be Neapco Performance Dynamics solid cross with Dura Lube and Alumigard
treatment on the caps.
Slip Yokes and U-Joints are provided by FRPP.
We can do a $ 30.00 Flat Shipping Rate price for UPS Ground in the US 48 states.
This is a little higher in 2012 because UPS added an over 60" long box surcharge and
most of these will probably be residential delivery.
We wold need approx. 10 days lead time to build these drive shafts and ship.
The $ will be sent to me with your shipping address and once at least 10 are made the question will be to see if people want to hold out for 20. I would like $150 deposit made. Dwolla or Paypal.
May 15th, sound like a good cut off date?
1. OxmanWI 4R70W
2.
3.
4.
5.
6.
7.
8.
9.
10.
Below is the information I was sent on the group buy.
Here is the information on the 3.5" Aluminum 1330 Drive Shafts for your group club buy.
item # description racerprice buy10 buy20
- racerprice buy10 buy20
- 3.5" Aluminum Drive Shaft .114" wall $299.00 $279.00 $250.00
- AOD/M5R2 Slip Yoke $62.95 $55.90 $53.00
- 4R70W Slip Yoke $75.00 $71.25 $67.50
The drive shaft slip yokes will be installed and the assembly balanced. The parts used are
the same as the Ford Motorsports Driveshaft (OEM Quality). Please check the transmission
rear seal diameter for the slip yokes.
The U-Joints will be Neapco Performance Dynamics solid cross with Dura Lube and Alumigard
treatment on the caps.
Slip Yokes and U-Joints are provided by FRPP.
We can do a $ 30.00 Flat Shipping Rate price for UPS Ground in the US 48 states.
This is a little higher in 2012 because UPS added an over 60" long box surcharge and
most of these will probably be residential delivery.
We wold need approx. 10 days lead time to build these drive shafts and ship.
The $ will be sent to me with your shipping address and once at least 10 are made the question will be to see if people want to hold out for 20. I would like $150 deposit made. Dwolla or Paypal.
May 15th, sound like a good cut off date?
1. OxmanWI 4R70W
2.
3.
4.
5.
6.
7.
8.
9.
10.
Attachments
Last edited: