Results 1 to 7 of 7

Thread: Supercoupe Crank Shaft - For Sale

  1. #1
    Join Date
    Jul 2010
    Location
    Fremont, CA
    Posts
    5

    Supercoupe Crank Shaft - For Sale

    I've got a Supercoupe crankshaft here purchased a while back for a motor build that I'll probably never get 'round to doing. The old 3.8 stang just keeps going and going and going ...

    The crank has been stored in my apartment here in sunny California in a cocoon of Styrofoam with a box that keeps the crank standing straight up on it's end. The crankshaft is covered in a thick coating of white lithium grease. The bearing surfaces are free of corrosion. It's ready for your all forged internals 3.8L V6 build or that Supercoupe restoration.

    The crank has "J615", "6303" and "C" stamped on one end. I'll send pictures if you reply with an email.

    I'm no expert on these cranks but it seemed like they are not so easy to find these days.

    First $100 plus shipping cost takes it. It's heavy so figure on $20 to $30 shipping.

    Thanks
    The Jet

  2. #2
    Join Date
    May 2008
    Location
    san lorenzo
    Posts
    1,512

    do you know the journal diameter

    please pm this info if its available... thanks
    1989 t-bird sc auto
    1992 t-bird sc 5 speed
    1995 t-bird sc 5 speed


    all stock but getting together some parts so i can have more fun!....

  3. #3
    Join Date
    Jul 2010
    Location
    Fremont, CA
    Posts
    5

    Will have crank inspected, post results w/in 24 hrs

    Great question. I have not measured the bearing journals on the crank. I will be bringing it to a machine shop to get it measured. Bye, Bye $20 but at least we'll have the data.

    I will post with the measurements within 24 hours.

    Thanks for you patience!

  4. #4
    Join Date
    Jul 2010
    Location
    Fremont, CA
    Posts
    5

    Measurements of Journal Diameters

    Results of the inspection are complete.

    Rod Journals measure 2.3102"
    Main Journals 1 - 3 measure 2.5188"
    Main Journal 4 measures 2.5095"

    How'd I get it? This crank was purchased from an SCCoA member a few years back.

    Where is it now? Fremont, CA

    Thanks!

  5. #5
    Join Date
    Jul 2010
    Location
    Fremont, CA
    Posts
    5

    Exclamation Help ... no PM access

    I am not able to access private messages but posting works fine. If you are interested in the crankshaft please email me at: "curiousgeorgeridesabike@msn.com"

    Also if you know how to regain access to PMs please contact me at:
    "curiousgeorgeridesabike@msn.com"

    Thanks!

  6. #6
    Join Date
    Jun 2013
    Posts
    17

    Sc crank

    I'll take it. You can call me at 408-838-4593

  7. #7
    Join Date
    Jun 2013
    Posts
    17

    Sc crank

    sent you and email concerning my interest in the crankshaft

Similar Threads

  1. Replies: 17
    Last Post: 03-21-2010, 07:47 PM
  2. crank shaft pulley fell off on the freeway!!
    By 94scnflt in forum Technical Forum
    Replies: 36
    Last Post: 02-25-2009, 01:01 PM
  3. Crank shaft pulley
    By mikeliv3s4sc in forum Super Coupe Club of Ontario
    Replies: 4
    Last Post: 02-19-2008, 03:59 PM
  4. Crank and Crank and Crank some more
    By swissboy97 in forum Technical Forum
    Replies: 3
    Last Post: 02-23-2003, 01:45 AM
  5. If you've rebuilt a supercoupe engine, read (long)
    By Gaston in forum Technical Forum
    Replies: 8
    Last Post: 07-15-2002, 02:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •