Tubular K-Member (Round 2)

[ScrapSC]

As am I... I have been wanting one of these since the first go round...

[XxSlowpokexX]

One day maybe! lol

[fastsc92]

One day maybe! lol

Patent stuff is slowly rolling in and being updated. Once the process is a little further down the road, we'll get these going again.

This process has been long and certainly not cheap! Patience is key.

[Mercutio]

Any news? I'm in the process of engine swapping my LX and will have to remove the K-member anyway.

[pro street rich]

Patent stuff is slowly rolling in and being updated. Once the process is a little further down the road, we'll get these going again.

This process has been long and certainly not cheap! Patience is key.

If you go back and read all the crap we have been going thru with these "AJE" set up's you might get the idea to move this to the front burners on your stove... There has been quite a few issues with motor mounts and now with the other parts as well. I got lucky and I am going to be running smaller tires on my setup but others have had rims get scrapped up from things hitting them... We need this product and we need something soon.....Rich.... Just my $0.02 worth here...

[Merc460]

Any updates? I am in the market and don't really want a AJE.

[davec73]

I saw this and thought I'd comment that all of the major issues with my AJE k member were worked out. the new Las are much bigger than the old ones. It rides and drives fantastic and of course it handles much better than stock. only flaw that didn't get worked out is when at 75% to 90% of steering lock the inside of the wheel rubs the lca.

[Fast Freddy]

I would be interested also.

[pro street rich]

this last week I had to send all my junk back to them. the wheels were sticking out of the fenders by THREE INCHES... So here I sit more than a year into the front rework with it still on jack stands.. Rich p.s. this is an AJE setup to make that clear...