Hello I am a new member to the forum I have recently purchased a 90 sc and am rather disappointed in the aftermarket support and price per modification I may be able to develop performance parts at a much more reasonable price and also offer products not currently available for these cars. However I need to see if there is a large enough market for such parts prior to me making large investments in supplies and labor. So I'm starting off with offering long tube headers which will be 16 gauge mild steel with 2 1/2 inch slip on collectors and either 1 5/8 primaries or as room allows for this we may also make them in 1 3/4 primaries with 3 inch collectors but I would need at least 25 orders to make this worth wild they would run somewhere around 400-450 for the 1 /58 and a little more for the 1 3/4. I have already fabricated and test fit a set on a friends 92 sc and have pictures of the column and floor pan clearance they are easier to install then the factory manifolds and would come with the aftermarket mustang 10mm header bolts and a anti rust shipping coating (ceramic coating and jet hot coatings may be offered as well). I will need feedback on this matter so I can address the many issues that inhibits the sc's performance as well as aftermarket support.