BirdofPrey97
Registered User
So, David Dalke was going to be nice and build an engine for me, but it so happens all sorts of parts became available and he has offered to assemble them for me and check everything out. For a car I was ready to just park and walk away from for another several years things are coming around nicely and way more quickly then first believed.
Harvest is going on, but with still having over 100,000 acres to go there won't be anytime for taking the current engine apart and getting ready for the new one.
What is being assembled:
(SP on names)
Kevin Leitman's 10.07 short block
Ken Wagner's pre turbo(s) cam
David Clark's Steigemier Heads that just make 420hp on his AR
With the cam David is going to put 1.6 adjustable rockers on it. Sticking with the MPX II SC since the car is an SC.
Needed Parts: Radiator, ported exhaust manifolds and 2.5" down tubes.
The extremely limited budget that I had has been exhausted, so there are several parts that have come up that would be nice additions, but sticking to the plan. (Thank you Sandy (my wife)).
If anyone has any of the above listed parts let me know. There isn't any free cash at the moment, but payments or patience and the $ will be available by the end of the year. Currently working 7 days a week, so there isn't any free time to do anything. Rainy days allow for some searching.
What I will have for sale:
Heads that have 3 angle valve job done on them, but all stock rockers and valves and springs. Car made 325hp at the rear wheels with an MPII SC
ARP head studs,
80MM C&L Maf set up for 60lb injectors.
Ken Wagner Double IC
The one thing I have decided on yet is if I want to install the aluminum flywheel or stick with the stock. Pros and Cons to both, but there is a few months to decide.
Anyhow, that's the current fun with my SC. Anyone else doing winter projects a few months early?
Harvest is going on, but with still having over 100,000 acres to go there won't be anytime for taking the current engine apart and getting ready for the new one.
What is being assembled:
(SP on names)
Kevin Leitman's 10.07 short block
Ken Wagner's pre turbo(s) cam
David Clark's Steigemier Heads that just make 420hp on his AR
With the cam David is going to put 1.6 adjustable rockers on it. Sticking with the MPX II SC since the car is an SC.
Needed Parts: Radiator, ported exhaust manifolds and 2.5" down tubes.
The extremely limited budget that I had has been exhausted, so there are several parts that have come up that would be nice additions, but sticking to the plan. (Thank you Sandy (my wife)).
If anyone has any of the above listed parts let me know. There isn't any free cash at the moment, but payments or patience and the $ will be available by the end of the year. Currently working 7 days a week, so there isn't any free time to do anything. Rainy days allow for some searching.
What I will have for sale:
Heads that have 3 angle valve job done on them, but all stock rockers and valves and springs. Car made 325hp at the rear wheels with an MPII SC
ARP head studs,
80MM C&L Maf set up for 60lb injectors.
Ken Wagner Double IC
The one thing I have decided on yet is if I want to install the aluminum flywheel or stick with the stock. Pros and Cons to both, but there is a few months to decide.
Anyhow, that's the current fun with my SC. Anyone else doing winter projects a few months early?