Results 1 to 7 of 7

Thread: Forged pistons and rods

  1. #1
    Join Date
    May 2004
    Location
    Va. Beach,Va.
    Posts
    6,936

    Forged pistons and rods

    These are out of a motor that my buddy was going to put in his car but things changed and he tore down the motor to part it out. I hate listing something when I don't know everything about the part but here's what I do know.

    Ross pistons
    Eagle rods

    He's believes that the pistons are stock bore size as are the rods. They're been out of the motor for at least a year and the motor only had less than 1k miles on it. He's asking $600 shipped so let me know if you're interested. I will entertain offers but it's up to him to accept or not.
    Attached Images Attached Images      
    SCCOA Member #2406
    '94 SC AUTO - $$$$ Pit
    http://www.sccoa.com/forums/garage_v..._vehicle&id=19

  2. #2
    Join Date
    May 2015
    Posts
    68
    Wow, this is a good deal! Will these work with a mustang crank inside a mustang block?

  3. #3
    Join Date
    May 2004
    Location
    Va. Beach,Va.
    Posts
    6,936
    Quote Originally Posted by 20psiofevil View Post
    Wow, this is a good deal! Will these work with a mustang crank inside a mustang block?
    Probably but I don't know for sure..........
    SCCOA Member #2406
    '94 SC AUTO - $$$$ Pit
    http://www.sccoa.com/forums/garage_v..._vehicle&id=19

  4. #4
    Join Date
    Dec 2010
    Location
    Palm Beach, Florida
    Posts
    371
    Quote Originally Posted by 20psiofevil View Post
    Wow, this is a good deal! Will these work with a mustang crank inside a mustang block?
    From the numbers on the rods they are 5.956" 351w rods which will work with the 3.8l crank. Your crank WILL need to be balanced for this combo since they're hbeam rods and forged pistons. They are heavier than the stock I-beam rods and cast pistons.

  5. #5
    Join Date
    May 2004
    Location
    Va. Beach,Va.
    Posts
    6,936
    price reduced to $525 shipped.............
    SCCOA Member #2406
    '94 SC AUTO - $$$$ Pit
    http://www.sccoa.com/forums/garage_v..._vehicle&id=19

  6. #6
    Join Date
    Jul 2016
    Posts
    1
    Quote Originally Posted by nickleman60 View Post
    price reduced to $525 shipped.............

    Interested, any numbers or markings on the pistons? If not can you measure them?
    thanks for your time

  7. #7
    Join Date
    May 2004
    Location
    Va. Beach,Va.
    Posts
    6,936
    price reduced to $500 shipped.............

    Sold........................
    Last edited by nickleman60; 08-28-2016 at 03:26 PM.
    SCCOA Member #2406
    '94 SC AUTO - $$$$ Pit
    http://www.sccoa.com/forums/garage_v..._vehicle&id=19

Similar Threads

  1. Need some old pistons and rods
    By V6Sprout in forum Super Coupe Club of Ontario
    Replies: 7
    Last Post: 11-08-2004, 11:33 PM
  2. Piston and rod group purchase has now begun.....
    By BT Motorsports in forum Group Purchases / Specials
    Replies: 52
    Last Post: 12-13-2003, 06:50 PM
  3. Piston and rod selection for 400hp attempt
    By dirtybird91 in forum Technical Forum
    Replies: 36
    Last Post: 09-24-2003, 07:49 PM
  4. What Pistons and Rods are you Hi HP guys using?
    By Supacharged89 in forum Technical Forum
    Replies: 22
    Last Post: 11-27-2002, 03:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •