1qwik99
Registered User
Hey all,
My AC was not as cold as it used to be so I pulled off the low side cap in order to add some freon. This is when it gets strange. I should mention that about a year ago, we replaced the low side schrader valve as it was leaking then. Not been in there since. After unscrewing the cap, I notice that there is NO Schrader valve inside, just a black rubber o-ring down in the tube. I hear it hissing so obviously it is leaking. Same on the High side....Any one know if I just need to install new valves? If so, which kind do the 95 SC's use? is it the skinny ones or the fatter ones. I have a kit that has both.
Thanks
My AC was not as cold as it used to be so I pulled off the low side cap in order to add some freon. This is when it gets strange. I should mention that about a year ago, we replaced the low side schrader valve as it was leaking then. Not been in there since. After unscrewing the cap, I notice that there is NO Schrader valve inside, just a black rubber o-ring down in the tube. I hear it hissing so obviously it is leaking. Same on the High side....Any one know if I just need to install new valves? If so, which kind do the 95 SC's use? is it the skinny ones or the fatter ones. I have a kit that has both.
Thanks
Last edited: