Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: Various parts, Cervini hood, SC seats, 90SC partout

  1. #1
    Join Date
    Feb 2003
    Location
    Tinton Falls, NJ
    Posts
    1,490

    Various parts, Cervini hood, SC seats, 90SC partout

    I have a 90 SC that I am going to be parting out. Engine is blown, and I have already removed the blown engine from the car. The body doesn't look too bad, but the underside has rust issues, and that combined with the blown motor means it isn't worth fixing. I will likely be keeping the trans and exhaust, as well as a few other little things, but other than that, let me know what you need. Also for sale (some of which came off this car)

    Fiberglass Cervini Mach1 style hood. This hood was already body worked and fitted to the car, and primed but never painted. I also drilled it for hood pins, since I don't trust fiberglass hoods at speed without them. Will fit 89-93 tbirds. $300 picked up.

    Re-upholstered black vynil SC seats with rear fold-down. These seats were re-done with the vinyl kit from supercoupeperformance.com (kit was about $700). Both front seats and the rear bottom were re-done. The fold-down rear still has the factory leather in decent shape, but I do have the new upholstery kit for that seat, which will be included. $400 picked up for front and rear seats, plus the upholstery to do the fold-down rear.

    Black dash, 2 small cracks on far right, no cracking across top as usually seen. Make offer.

    Early style SC wheels in good shape $100 plus shipping for all 4

    SC side skirts $100 plus shipping

    Eibach 1.5" lowering springs $150 plus shipping

    Gray tweed/leather SC seats in good shape, includes non-fold down rear. $200 picked up

    Set of 93+ front spindles, required for brake upgrades on 89-92 cars $50 plus shipping

    Factory 94/95 SC radiator. Bracket for intercooler has been removed. Radiator has the plastic end tanks. No leaks, make offer.

    I have to go through my garage and see what else I have, and I will update the thread, including additional pics.










  2. #2
    Join Date
    Jul 2002
    Posts
    469

    Seats

    Hi do you still have seats?

  3. #3
    Join Date
    Jun 2002
    Location
    ny\long island
    Posts
    2,653

    sc parts

    sup mikey ltns, i need a few parts. what r u asking for the passenger fender,both rear roof molding( on sides of the rear glass)? are those clear corners? let me know on price and if i need to drive up . thx tony.

  4. #4
    Join Date
    Feb 2003
    Location
    Tinton Falls, NJ
    Posts
    1,490
    Hey Tony! They are clear corners, but I'm keeping those. How about $50 picked up for the fender and both roof moldings?

    Shawn, yes the seats are still available.

  5. #5
    Join Date
    Nov 2009
    Posts
    56

    cervini hood

    hey boss, is the cervini hood still available? any issues with it? cracks/scratches? is there a number that I can call you? david.drake@sympatico.ca...I check my email more regular than the forum...thx...I tried to leave a pm but it says your inbox is full

  6. #6
    Join Date
    Oct 2003
    Location
    Eldersburg MD
    Posts
    90
    dibs on the eibachs, the clutch pedal, and the shifter please.

    I can meet you halfway

  7. #7
    Join Date
    Oct 2003
    Location
    Eldersburg MD
    Posts
    90
    410-459-2635. Text or call me if you see this, I think this will expedite things, I am not going to allow a clutch pedal to pass me by again.

  8. #8
    Join Date
    Feb 2003
    Location
    Tinton Falls, NJ
    Posts
    1,490
    Bernie, the hood is still available, and no, there are no issues or damage. Just bolt it on and go.

    Joey, I will call you later today.

  9. #9
    Join Date
    Apr 2005
    Location
    Canton, OH
    Posts
    623

    Side skirt

    I know you may not want to split it up, but I need the passenger side rear portion of the side skirt. If interested in selling me that piece by itself let me know!

  10. #10
    Join Date
    Nov 2002
    Location
    Howell, NJ
    Posts
    28
    Differential unit?

  11. #11
    Join Date
    Feb 2003
    Location
    Tinton Falls, NJ
    Posts
    1,490
    The diff is a stock 2.73 trak-lok. I would let it go for $125.

  12. #12
    Join Date
    Nov 2002
    Location
    Howell, NJ
    Posts
    28
    Quote Originally Posted by MadMikeyL View Post
    The diff is a stock 2.73 trak-lok. I would let it go for $125.
    Just for clarity as this will be used in another application, is the pumpkin cast iron?

  13. #13
    Join Date
    Feb 2003
    Location
    Tinton Falls, NJ
    Posts
    1,490
    Yes, cast iron pumpkin, aluminum diff cover, 2.73 gear ratio, and limited slip differential.

  14. #14
    Join Date
    Nov 2002
    Location
    Howell, NJ
    Posts
    28
    Ok. Can you text me at 929- 283- zero six seven seven? In local in Howell, nj.

  15. #15
    Join Date
    Nov 2002
    Location
    Howell, NJ
    Posts
    28
    Waiting for a call or text.

    Tommy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •