Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: DLF products....Delrin/UHMW bushings, SRB sleeves, rear caliper brackets...

  1. #1
    Join Date
    Sep 2013
    Posts
    21

    DLF products....Delrin/UHMW bushings, SRB sleeves, rear caliper brackets...

    Hey guys,

    I've had a few people recommend that I start a post here on the forum detailing the parts I make and sell. If you don't know, I'm the guy who bought DLF's (RIP) plans and some of his equipment (like his lathe) after he passed away last year.

    I haven't been doing a whole lot of advertising or pushing this stuff, but I wanted to just let you guys know about me. lol. I can make/produce almost everything that Doug did, and better yet, I've been able to meet or break his prices. Here's a rundown of my prices as well as some pictures since we all know that a thread is worthless without them....

    Delrin rear LCA bushings (Mark VIII LCA's only, for now) - $325 shipped

    Delrin rear knuckle bushings - $325 shipped

    UHMW rear subframe bushings - $325 shipped

    Buy any 2 of the above sets for $625 shipped, or all 3 sets for $900 even.

    SRB sleeves. 100% 304 stainless steel construction, TIG welded on the ends for added strength. - $135 shipped

    UHMW rear spring perches - $180 shipped, includes the Prothane poly isolators. $150 shipped, without the isolators.

    Stainless steel rear brake caliper relocation brackets for use with Cobra rear rotors, includes SS bolts - $80 shipped

    Stainless steel steering u-joint kit - $150 shipped


    As mentioned above, any items purchased together will receive a discount depending on what is ordered.

    Pictures!

    Name:  DelrinLCA.jpg
Views: 987
Size:  398.2 KB
    Name:  image.jpg
Views: 907
Size:  398.3 KB
    Name:  image.jpg
Views: 857
Size:  398.5 KB
    Name:  image.jpg
Views: 803
Size:  395.5 KB
    Name:  image.jpg
Views: 792
Size:  200.7 KB

  2. #2
    Join Date
    Jul 2002
    Location
    Mims, Fl
    Posts
    2,025

    Thumbs up

    Great post Jay, welcome and good luck with your items.. We need good stable Mfg types making stuff for our cars.. The market has gotten tight..

    RJ

  3. #3
    Join Date
    Sep 2013
    Posts
    21
    Quote Originally Posted by kamakazie_1 View Post
    Great post Jay, welcome and good luck with your items.. We need good stable Mfg types making stuff for our cars.. The market has gotten tight..

    RJ
    Thanks! I agree on the tight market. It's very evident on the Mark VIII side of things as well. I've had Mark VIII's as far back as 2002, and have seen first-hand how it's progressed. I'd hate to see what it'd be like for the Mark VIII's if it weren't for the Thunderbirds!


    I meant to include this in the original post, but please feel free to ask any questions that any of you may have. You can ask here, or through PM's.

  4. #4
    Join Date
    Apr 2002
    Location
    Greenville, IN
    Posts
    4,253
    Thanks for advertising...I've been wanting to purchase a set for awhile now....back in the queue now!
    Matt Haub
    Shootouts: '09 SS 1st | '10 Mod1 2nd | '11 Bracket 3rd | '12 Bracket 1st | 2013 | '14 Bracket 3rd | 2015 | '16 Bracket 1st & Mod2 2nd | 2017 |
    Black '89 5spd - 281K miles, MPx, E85, Alky-Inj RWHP: ? RWTQ: ? Best 1/4mi:12.521, MPH:107.23mph
    35th Anniversary Auto 46k miles | Red '93 Auto 186k miles
    My Garage

  5. #5
    Join Date
    Sep 2013
    Posts
    21
    Quote Originally Posted by DrFishbone View Post
    Thanks for advertising...I've been wanting to purchase a set for awhile now....back in the queue now!
    Sure thing!

    One other thing I forgot to add: due to my full time job and family, I can't always afford the luxury of having these parts ready made. I do always try to keep the raw materials in stock though. I just ask that you keep in mind that, depending on what/how much you're ordering, I may have a lead time of a few days, or up to 3 weeks for a large order.

    Thanks!

  6. #6
    Join Date
    Apr 2002
    Location
    Howell, NJ
    Posts
    1,707
    Great to have another custom fabber around! Can you give a bit more info on the Stainless steel steering u-joint kit - $150 shipped?
    SCCoA Member# 1786,
    1990 SC, AOD, 193k, Twilight Blue, bought in 1994, 1.7 AR tuned by Dave Dalke
    1994 SC, 4R70W, 139k, Teal Metallic, bought in 2014
    2014/2016 Carlisle 1st Place Winner, 94-95 SCs
    2014 Carlisle SCCOA Doug Fraleigh Best of Show Modified Trophy


  7. #7
    Join Date
    Sep 2013
    Posts
    21
    Quote Originally Posted by joenintiesc View Post
    Great to have another custom fabber around! Can you give a bit more info on the Stainless steel steering u-joint kit - $150 shipped?
    Sure. It replaces the worn out, stock rag joint, giving you better durability, and a more accurate steering feel.

    Here's one I completed recently for one of the Mark VIII guys:

    Name:  image.jpg
Views: 714
Size:  365.1 KB

  8. #8
    Join Date
    Jun 2002
    Location
    ny\long island
    Posts
    2,657

    steering coupler

    that looks nice, I need 1 to fit my 93 sc. maybe in a few weeks when I can save up on some cash.

  9. #9
    Join Date
    Jul 2004
    Location
    Hamilton NJ
    Posts
    1,966
    Thanks for continuing Doug's great products!!!

    I actually met him a couple times at his house, I will most likely get a set of those spring perches off ya soon!

    Thanks,

    Tom
    Tom Downs-member#2752
    MPX'd 90 SC Auto~bought Feb. 2012
    http://www.sccoa.com/forums/garage_v...vehicle&id=424

  10. #10
    Join Date
    Sep 2013
    Posts
    21
    Quote Originally Posted by pock1 View Post
    that looks nice, I need 1 to fit my 93 sc. maybe in a few weeks when I can save up on some cash.
    Sure thing, just let me know when you're ready!

    Quote Originally Posted by 89XR7TD View Post
    Thanks for continuing Doug's great products!!!

    I actually met him a couple times at his house, I will most likely get a set of those spring perches off ya soon!

    Thanks,

    Tom
    I had the good fortune of meeting him once at his house too, even though I live in SC.

    I was flying up to NJ for a job interview in his hometown, and happened to have a part that he needed at the same time. I ended up delivering it to him at his house and hanging out for a little while. Shipping was free, courteous of Exelon Energy Corp. lol

  11. #11
    Join Date
    Apr 2002
    Location
    Howell, NJ
    Posts
    1,707
    Quote Originally Posted by JayBob View Post
    Sure. It replaces the worn out, stock rag joint, giving you better durability, and a more accurate steering feel.

    Here's one I completed recently for one of the Mark VIII guys:
    Is that section of shaft SS too?
    SCCoA Member# 1786,
    1990 SC, AOD, 193k, Twilight Blue, bought in 1994, 1.7 AR tuned by Dave Dalke
    1994 SC, 4R70W, 139k, Teal Metallic, bought in 2014
    2014/2016 Carlisle 1st Place Winner, 94-95 SCs
    2014 Carlisle SCCOA Doug Fraleigh Best of Show Modified Trophy


  12. #12
    Join Date
    Sep 2013
    Posts
    21
    Quote Originally Posted by joenintiesc View Post
    Is that section of shaft SS too?
    Sure is.

  13. #13
    Join Date
    Oct 2016
    Posts
    1

    irs bushings

    Quote Originally Posted by JayBob View Post
    Hey guys,

    I've had a few people recommend that I start a post here on the forum detailing the parts I make and sell. If you don't know, I'm the guy who bought DLF's (RIP) plans and some of his equipment (like his lathe) after he passed away last year.

    I haven't been doing a whole lot of advertising or pushing this stuff, but I wanted to just let you guys know about me. lol. I can make/produce almost everything that Doug did, and better yet, I've been able to meet or break his prices. Here's a rundown of my prices as well as some pictures since we all know that a thread is worthless without them....

    Delrin rear LCA bushings (Mark VIII LCA's only, for now) - $325 shipped

    Delrin rear knuckle bushings - $325 shipped

    UHMW rear subframe bushings - $325 shipped

    Buy any 2 of the above sets for $625 shipped, or all 3 sets for $900 even.

    SRB sleeves. 100% 304 stainless steel construction, TIG welded on the ends for added strength. - $135 shipped

    UHMW rear spring perches - $180 shipped, includes the Prothane poly isolators. $150 shipped, without the isolators.

    Stainless steel rear brake caliper relocation brackets for use with Cobra rear rotors, includes SS bolts - $80 shipped

    Stainless steel steering u-joint kit - $150 shipped


    As mentioned above, any items purchased together will receive a discount depending on what is ordered.

    Pictures!

    Name:  DelrinLCA.jpg
Views: 987
Size:  398.2 KB
    Name:  image.jpg
Views: 907
Size:  398.3 KB
    Name:  image.jpg
Views: 857
Size:  398.5 KB
    Name:  image.jpg
Views: 803
Size:  395.5 KB
    Name:  image.jpg
Views: 792
Size:  200.7 KB
    jay bob can you email me i would like to purchase some bushings from you
    Last edited by 67 ford; 10-14-2016 at 05:25 PM.

  14. #14
    Join Date
    Sep 2013
    Posts
    21
    Quote Originally Posted by 67 ford View Post
    jay bob can you email me i would like to purchase some bushings from you
    I tried to send you a email, but there's no option to do so. Couldn't send a PM either. I think there may be a post limit. If you'd like, you can send me an email at jay.richmond (at) gmx.com

  15. #15
    Join Date
    Feb 2007
    Location
    louisiana
    Posts
    931
    Nice work man

Similar Threads

  1. Rear Calipers brackets
    By OxmanWI in forum Want to Buy
    Replies: 2
    Last Post: 04-14-2007, 08:45 AM
  2. rear caliper bracket
    By jackpriceisgod in forum Technical Forum
    Replies: 2
    Last Post: 11-13-2006, 12:06 PM
  3. Rear caliper brackets/ sc wheels
    By repoman27 in forum Want to Buy
    Replies: 3
    Last Post: 04-17-2006, 04:45 PM
  4. Part numbers for rear caliper brackets and pins for '89-'93
    By dirtybird91 in forum Technical Forum
    Replies: 0
    Last Post: 11-23-2002, 04:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •