W
wmcnamara
Guest
Hi - I found the old posts for this, but the pictures don't come up anymore. Does anyone have the process for bleeding the ABS Teves IV system without the special tool? I had to replaced the valve body under the pump. There was a guy named Mark on here that had come with a jumper procedure in the post here:
http://www.sccoa.com/forums/archive/index.php/t-45452.html
I don't quite understand what should be jumped to which pigtail. Do I have to run a wire from the battery to the pump pigtail for 12 V power?
Didn't want to screw up my new valve body. Thanks, Bill
http://www.sccoa.com/forums/archive/index.php/t-45452.html
I don't quite understand what should be jumped to which pigtail. Do I have to run a wire from the battery to the pump pigtail for 12 V power?
Didn't want to screw up my new valve body. Thanks, Bill