figulaz
SCCoA Member
So i set up my front mount intercooler...i forgot the exact dimensions but its big...4 " width and i massaged the inside of the bumper/frame rails with a bfh. With the stock ic no stalling on decceleration. With the new ic it'll stall out on off ramps or sudden redlights..i set up capped off piece of scrap pipe with a gauge and a valve to inflate the system and blocked off the return pipe. it'll hold 18 psi compressed air indefinitely...more than i would ever make...wide band is always hanging around 14.7 at idle wirh either intercooler..sounds like a boost leak but why is it holding pressure?...feels weak sauce with fmic..runs perfect with stock but falls on its face...94 ported with 10% is gonna make heat.