Results 1 to 8 of 8

Thread: Fixed problem

  1. #1
    Join Date
    May 2004
    Location
    Marlton, NJ
    Posts
    167

    Fixed problem

    Finally after taking off the winter i started looked at my issue regarding the check engine light and tach. Well I found the problem and wanted to pass on.It was the wire behind the fuel pressure regulator that was broken. A simple fix that drove many people just hit cured now runs great. Wanted to pass this on.

  2. #2
    Join Date
    Dec 2007
    Location
    Pacific Rim
    Posts
    6,721
    Quote Originally Posted by 90redsc View Post
    It was the wire behind the fuel pressure regulator that was broken.
    Interesting - we've been told that wire is a ground for the O2 sensors, so I can imagine it throwing a CEL. I don't suppose there were any codes, tho?

    Thanks for the followup.

  3. #3
    Join Date
    May 2004
    Location
    Marlton, NJ
    Posts
    167
    Yes code when warmed up was running too lean.

  4. #4
    Join Date
    May 2004
    Location
    Marlton, NJ
    Posts
    167
    The tech now functions normal also

  5. #5
    Join Date
    Dec 2007
    Location
    Pacific Rim
    Posts
    6,721
    Quote Originally Posted by 90redsc View Post
    The tech now functions normal also
    What was it doing when it didn't function normally? Dead, or dancing, or....?

  6. #6
    Join Date
    May 2004
    Location
    Marlton, NJ
    Posts
    167
    Dancing around then would stop

  7. #7
    Join Date
    Dec 2007
    Location
    Pacific Rim
    Posts
    6,721
    Quote Originally Posted by 90redsc View Post
    Dancing around then would stop
    Usually cam sensor/harness issues in that case, but if your work made it behave, it's all good.

  8. #8
    Join Date
    May 2004
    Location
    Marlton, NJ
    Posts
    167
    Yep replaced many parts. But works now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •