Results 1 to 7 of 7

Thread: Ported gains ?

  1. #1
    Join Date
    Aug 2017
    Posts
    33

    Ported gains ?

    So I'm porting my heads and intake ...the best I can...and noticed. The intake is brutal restrictive ,like the runners are small compared to the gasket? Should I port match the gasket? Seems like a ~~~~ load of material to remove. Is this normal. Also I'm sure it's been asked a million times but what's the gains on some heavy ported heads and intake . I'm also porting the SC inlet outlet and running a 90mm lightning maf 5.4 f150 modified TB I'm thinking 74 75 mm . Lots of air flow compared to stock. Is it worth the work? I've heard that it makes maybe 15 HP.

  2. #2
    Join Date
    Aug 2017
    Posts
    33
    Someone has to have something ?

  3. #3
    Join Date
    Aug 2005
    Location
    Paoli Indiana
    Posts
    4,655
    There is alot more to porting the heads than just the gasket area. I don't recomend touching them unless you know what you are doing. You can actually make it have less power! Don't ask me how I know..... Leave the head porting to the profesionals!!
    93 SC Red Auto 111k
    2013 Shootout Bracket ET First Place
    2015 Shootout Car Show Honerable Mention
    2016 Shootout Mod-1 First Place
    4.2, 2.3 Whipple, 3.73s AOD
    395rwhp 11.360 /??? mph
    90 SC 35th auto 84k

  4. #4
    Join Date
    Aug 2017
    Posts
    33
    I've ported lots of heads before never had issues. Does anyone have any experience with ported stuff??

  5. #5
    Join Date
    Dec 2007
    Location
    Pacific Rim
    Posts
    6,698
    General consensus is you will see minimal gains/ROI. There simply isn't enough material in the stock intake manifold to work with. Other than perhaps converting to a later model splitport manifold, it seems better to focus on TB, plenum, heads and exhaust, instead.

    Searching, rather than begging/waiting will reveal several threads on the topics intake/heads/exhaust porting - example: http://www.sccoa.com/forums/showthre...ht=port+intake

    Good luck.
    Last edited by KMT; 09-17-2018 at 12:23 PM.

  6. #6
    Join Date
    Apr 2002
    Location
    Greenville, IN
    Posts
    4,390
    Although I have no comparisons or flow numbers, I feel like my first home-porting job on SC heads was a success. I cleaned up the combustion chambers, partially unshrouded the valves, gasket matched the intake runners (but didn't touched the exhaust runners, valves, or bowls) and put down 301rwhp with a Magnuson S-Port with a mild cam and supporting mods. This pull included a little belt slip (@10% OD, if I recall) and a beginner's attempt at tuning. I ran 13.1s 1/4mi with this setup. Later upgraded to E85 and an MPx and ran 12.5s without touching the heads in 7 years of driving/racing.

    Anyways, I say give it a try, just don't expect to or try to break any records with flow testing.
    Matt Haub
    Shootouts: '09 SS 1st | '10 Mod1 2nd | '11 Bracket 3rd | '12 Bracket 1st | 2013 | '14 Bracket 3rd | 2015 | '16 Bracket 1st & Mod2 2nd | 2017 |
    Black '89 5spd - 281K miles, MPx, E85, Alky-Inj RWHP: ? RWTQ: ? Best 1/4mi:12.521, MPH:107.23mph
    35th Anniversary Auto 46k miles | Red '93 Auto 186k miles
    My Garage

  7. #7
    Join Date
    Aug 2017
    Posts
    33
    Thanks for the replies!. Yeah I guess I'm just going to send it.i wonder what gains is to be had by converting to split port?. I'm pretty good at fabrication and making intakes. Would mind giving it a try.

Similar Threads

  1. Replies: 4
    Last Post: 01-27-2013, 02:22 AM
  2. gen1 m90 porting power gains?
    By decipha in forum Technical Forum
    Replies: 6
    Last Post: 08-25-2010, 11:58 AM
  3. Ported Head & Cam rwhp gain
    By Randy N Connie in forum Non Technical Forum
    Replies: 74
    Last Post: 12-27-2005, 01:23 PM
  4. Ported Stock Manifolds. Expected gains?
    By 91BLOWNSC in forum Technical Forum
    Replies: 9
    Last Post: 03-11-2003, 11:34 PM
  5. guess my hp gain from home head port work
    By corey796 in forum Technical Forum
    Replies: 6
    Last Post: 03-09-2003, 11:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •