Rear Drag Wheels 15x10

fastsc92

Registered User
Plans have changed as I've decided to go wider so these wheels need to go.

15 x 10 Racestar 5 x 4.5 pattern. These wheel have a custom backspace to fit with the stock IRS system ( 6.75"). These wheels were mounted but have seen zero road miles. They come with valve stems installed, hub-centric rings (70.6mm ID), (10) 0.75" long mag-shank lug nuts, thin-wall socket and center caps. Available with drag slicks (26x10 x 15 ET Drags) if desired for an additional cost.

Unclear if these will fit over Cobra Rear Brakes, as I have no means of verifying other than taking measurements and providing a 2D drawing of it's cross-section.

You'll need to trim your stock rear upper control arms slightly in order to gain proper clearance. Pretty easy task, only takes a few minutes to perform.

$380+shipping for the pair

20160716_144244_zpsjdsnsrjp.jpg

20160716_144222_zps5cpd8yob.jpg

20160716_144258_zpsqgwemqug.jpg

20160715_211721_zpsjllwn4mn.jpg
 
Last edited:
BUMP!!! Price reduced and now includes lug-nuts, installation socket and hub-centric rings. Bolt on and go racing!
 
Back
Top