FurryWrecker911
SCCoA Member
First time with the Tbird that I was able to lift it in my own garage. My goal was this: clamp down the heat shield on the muffler to stop the god-awful rattling at low rpms and figure out where I'm loosing coolant from by inspecting the underside of the engine. I was not ready to be greeted by a hole in the undercarriage and to bust 3 of the 4 jacking spots clean apart/flat. The front left was already destroyed before I got to it, my admittedly cheap quality jack dropped the poor car on the back right jack stand smashing it up, and I was able to ease the front right down on the jack stand, but it creaked then split right apart in my ear. The back left was chipper, though, so there's my silver lining. The metal under here represents that of slightly better quality cardboard. Yeesh.
I might need to find a body shop to cut and weld in some new metal because this is really weak. I also need a not-garbage jack.
I might need to find a body shop to cut and weld in some new metal because this is really weak. I also need a not-garbage jack.