part number

99GSXR750

Registered User
Anyone have a part number for the rear upper control arm nut (frame side)? I know the bolt's discontinued but I was wondering if the nut has been too.

Thanks,
Mike
 
N-805470-S is what im coming up with for the nut

N-805678-s160 for the bolt

Both do not show as good part numbers anymore. They could very well have been replaced with a different number. The bolt spec says it’s a m12x110.5
 
N-805470-S is what im coming up with for the nut

N-805678-s160 for the bolt

Both do not show as good part numbers anymore. They could very well have been replaced with a different number. The bolt spec says it’s a m12x110.5

McMaster-Carr stocks a M12x110 in 10.9 grade. https://www.mcmaster.com/screws/sys...0mm/fastener-strength-grade-class~class-10-9/

They should have a selection of nuts to fit the bolt as well. https://www.mcmaster.com/nuts/syste...-hand/fastener-strength-grade-class~class-10/
 
Thanks guys. I know the nut is 12mm x 1.75. I found a 10.9 replacement at a local hardware store. I was just hoping to locate an OEM nut.

Mike
 
Back
Top