Mike Manzo
Registered User
This may be a dumb question, but what should I use to seal between the 85mm MagnumPowers Throttle Body and the Inlet Plenum?
I was thinking LocTite Red like what is used on the blower top (from Ford anyway) or some people use Permatex Copper RTV on the intercooler tubes/top, but I have never seen anyone talk about gasket material between the TB and the plenum.
Thanks!
I was thinking LocTite Red like what is used on the blower top (from Ford anyway) or some people use Permatex Copper RTV on the intercooler tubes/top, but I have never seen anyone talk about gasket material between the TB and the plenum.
Thanks!