Heads, what do you recommend?

B

BlueThunder90

Guest
Heads, what do you recommend?

Any of you guys using aftermarket heads? If not, do you know of any company who makes them for the 90 SC?

I've been pricing out some head work and it's close to $1200 for the complete job. I'd rather buy new heads if possible.
 
Re: Heads, what do you recommend?

Steve,

There are no aftermarket heads available. They have to be made up by a machine shop and fully assembled. What does the $1200 you were quoted include?

Expect to spend that much at a bare minimum.
 
Re: Heads, what do you recommend?

The $1200 includes port and polish and a full valve job. Springs, seals, etc.
 
Re: Heads, what do you recommend?

I am getting a member of our club to do a p/p with 5 angle grind job, and mill the heads for $500

Ask around, see if you can get some sweet deals
 
Re: Heads, what do you recommend?

Steve,

That is a great price. Get some flow numbers and have someone make a cam to match. With some bolt-ons you'd be around 300RWHP.

Keep in mind you'll have to change quite a bit to accomodate those heads.
 
Back
Top