Results 1 to 9 of 9

Thread: 750 HP SC engine

  1. #1

    750 HP SC engine



    Cosworth GBA 1.5 litre V6 F1 engine

    Condition: Very Good
    Price: £15000 GBP United Kingdom Pounds
    Location: Northampton, United Kingdom

    Description
    We Have available three (3) of these used ex F1 engines built around 1986, they are the GBA 1.5 litre V6 twin turbocharged engine. They originally produced 750 BHP and can run 1000 BHP with boost and fuel adjustments. They come complete with injectors and ECU's but it would need to be stripped down and checked before running. All other components like manifolds, turbos, flywheel and clutch are all present. £15k is for EACH engine, not for all of them.

    History
    produced in 1986, the 120 degree v angle engine ran in Formula one in a Benetton in 1987 using "rocket fuel" to attain 1000 BHP

    Technical Data
    Weight: 200+ lbs
    Engine
    Engine Builder: Cosworth Racing
    Manufacturer: Cosworth Racing
    Type: Formula One
    Displacement: 1497 cc
    Horsepower: 750 - 1000
    Torque: unknown
    Induction: Forced air via twin turbochargers, Fuel injected
    Heads: cast aluminium alloy, 4 valves per cylinder
    Block: Cast aluminium alloy
    Main Caps: unknown
    Crankshaft: billet type
    Connecting Rods: unknown
    Pistons: pressure forged
    Camshaft: unknown
    Valves: 4 off, poss. titanium?
    Valve Train: unknown
    Clutch: unknown
    Pressure Plate: unknown
    Flywheel: unknown
    Exhaust: tubular steel
    Total Time: unknown
    Races: 1
    not much known about these engines, they were run in a race, and removed from the car, they may have been rebuilt, but have been in storage for a number of years. They can be viewed if required by appointment only at our premises in Northampton.
    Spares
    crank sensors and a few seals etc.
    some parts have been remanufactured
    by various companies, we can reproduce
    pistons etc. if required




    With a engine like this any SC whould be awsome

  2. #2
    hey is setup would work great



    anyone want to step up and try it on a SC engine

  3. #3
    Join Date
    Oct 2002
    Location
    Indiana
    Posts
    1,176
    for $28,000 you could have someone like Saleen or Coy Miller build you a motor that would have about the same power-but with a h*** of a lot more torque!

    They're F1 motors-you wouldn't get much of a launch with a 4000lb car like they do with the F1 cars(1500lbs), and the power band is up around the 10,000RPM range.

  4. #4
    Join Date
    Nov 2002
    Location
    Columbus, Ohio
    Posts
    6,924
    God that thing has to be a nightmair to work on!

    Shane

  5. #5
    Join Date
    Jan 2003
    Location
    Allentown, Pa
    Posts
    1,031
    but gorsh... it sure is purrtyy paw... mabye one day... hehe

  6. #6
    Join Date
    Nov 2002
    Location
    Cresson, TX (DFW)
    Posts
    1,320
    Originally posted by thundersc
    hey is setup would work great



    anyone want to step up and try it on a SC engine
    So who's Pantera equipment or whatever is this?

    Gotta love those F1 engines but I would need the transaxle to go with.
    Last edited by Doug Franklin; 03-01-2004 at 03:42 AM.

  7. #7


    Hewland NLT Sequential 6-Speed
    Serial Number: HE54
    Condition: Concours
    Price: $20000
    Location: Canada

    Description
    -Brand new 4/02 never used or installed. This unit was spec'd and purchased from Hewland as a team spare.

    Transmission
    -Manfacturer: Hewland
    -Type: NLT Sequential 6-Speed
    -Gears: 1st gear only in case, ratio:12:36
    -Races: new

    Rear End
    -Manufacturer: Hewland
    -Type: integral with gearbox
    -Ratio: 10:31 CWP
    -Differential: Powerflow diff
    -Races: new
    -Magnesium case, 80x80 ramp angles

    Spares
    none

  8. #8
    Hewland DG300 Lola T332 Complete Rear



    Hewland DG300 Lola T332 Complete Rear
    Condition: Good
    Price: $18000
    Location: Australia

    Description
    Lola T332 F5000 DG300 Complete rear end including uprights, brakes, callipers, drive shafts and Koni Shocks. Comprehensive gear ratio’s and more.
    Transmission
    -Manfacturer: Hewland
    -Type: DG-300
    -Complete rear end including uprights, brakes, callipers, drive shafts and Koni Shocks. Comprehensive gear ratio’s and more.

    Spares
    -none

  9. #9
    Join Date
    Nov 2002
    Location
    Cresson, TX (DFW)
    Posts
    1,320
    Thanks, but looks like they have what I need at my price over at OJ Hanna at MSR.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •