750 HP SC engine

thundersc

Banned
1077724596la.jpg


Cosworth GBA 1.5 litre V6 F1 engine

Condition: Very Good
Price: £15000 GBP United Kingdom Pounds
Location: Northampton, United Kingdom

Description
We Have available three (3) of these used ex F1 engines built around 1986, they are the GBA 1.5 litre V6 twin turbocharged engine. They originally produced 750 BHP and can run 1000 BHP with boost and fuel adjustments. They come complete with injectors and ECU's but it would need to be stripped down and checked before running. All other components like manifolds, turbos, flywheel and clutch are all present. £15k is for EACH engine, not for all of them.

History
produced in 1986, the 120 degree v angle engine ran in Formula one in a Benetton in 1987 using "rocket fuel" to attain 1000 BHP

Technical Data
Weight: 200+ lbs
Engine
Engine Builder: Cosworth Racing
Manufacturer: Cosworth Racing
Type: Formula One
Displacement: 1497 cc
Horsepower: 750 - 1000
Torque: unknown
Induction: Forced air via twin turbochargers, Fuel injected
Heads: cast aluminium alloy, 4 valves per cylinder
Block: Cast aluminium alloy
Main Caps: unknown
Crankshaft: billet type
Connecting Rods: unknown
Pistons: pressure forged
Camshaft: unknown
Valves: 4 off, poss. titanium?
Valve Train: unknown
Clutch: unknown
Pressure Plate: unknown
Flywheel: unknown
Exhaust: tubular steel
Total Time: unknown
Races: 1
not much known about these engines, they were run in a race, and removed from the car, they may have been rebuilt, but have been in storage for a number of years. They can be viewed if required by appointment only at our premises in Northampton.
Spares
crank sensors and a few seals etc.
some parts have been remanufactured
by various companies, we can reproduce
pistons etc. if required

1077724596pc.jpg

1077724596pb.jpg


With a engine like this any SC whould be awsome
 
for $28,000 you could have someone like Saleen or Coy Miller build you a motor that would have about the same power-but with a h*** of a lot more torque!

They're F1 motors-you wouldn't get much of a launch with a 4000lb car like they do with the F1 cars(1500lbs), and the power band is up around the 10,000RPM range.
 
thundersc said:
hey is setup would work great

1055278551pe.jpg


anyone want to step up and try it on a SC engine

So who's Pantera equipment or whatever is this?

Gotta love those F1 engines but I would need the transaxle to go with.
 
Last edited:
1059855621pa.jpg

1059855621pb.jpg

Hewland NLT Sequential 6-Speed
Serial Number: HE54
Condition: Concours
Price: $20000
Location: Canada

Description
-Brand new 4/02 never used or installed. This unit was spec'd and purchased from Hewland as a team spare.

Transmission
-Manfacturer: Hewland
-Type: NLT Sequential 6-Speed
-Gears: 1st gear only in case, ratio:12:36
-Races: new

Rear End
-Manufacturer: Hewland
-Type: integral with gearbox
-Ratio: 10:31 CWP
-Differential: Powerflow diff
-Races: new
-Magnesium case, 80x80 ramp angles

Spares
none
 
Hewland DG300 Lola T332 Complete Rear

1063318042la.jpg


Hewland DG300 Lola T332 Complete Rear
Condition: Good
Price: $18000
Location: Australia

Description
Lola T332 F5000 DG300 Complete rear end including uprights, brakes, callipers, drive shafts and Koni Shocks. Comprehensive gear ratio’s and more.
Transmission
-Manfacturer: Hewland
-Type: DG-300
-Complete rear end including uprights, brakes, callipers, drive shafts and Koni Shocks. Comprehensive gear ratio’s and more.

Spares
-none
 
Back
Top