Wzenheimer
Registered User
General Rules
1. All vehicles for heads up competition must be an R Code 1989-1990 Mercury Cougar XR7 or 1989-1995 Thunderbird Supercoupe.
2. Any MN12 Chassis may run in Bracket classes only.
3. All classes must meet and follow current NHRA or IHRA safety requirements and submit to track tech inspections. Track tech inspector decisions will be final.
4. All classes are also subject to Shootout Tech inspection.
5. All drivers/participants must be at least 18 years of age.
6. There will be no driver changes allowed after eliminations begin. All drivers must be registered with the shootout. Each car may be entered only once in any heads up class and only once in any bracket class for a total of two entries. Both entries must be seperately registerd with the shootout in advance to the event. There will be no parts changes after eliminations begin.
7. Use of power adders (Nitrous Oxide, Nitro or any of its derivatives) are only allowed where the rules specifically state such use.
Street Stock Class
Any modifications not specifically listed in these rules will not be
allowed.
1. Exterior:
Body kits, wings, spoilers, fender extensions and all other cosmetic body modifications are allowed. Such modifications must not serve any other purpose. All original body panels must be present and function as originally designed.
2. Interior:
Stock interior must be retained. Panels may be modified for any cosmetic reasons but must not be removed. All factory equipment must be retained including but not limited to A/C, radio, power seats, power windows, etc.
3. Wheels/tires.
a. Tire width is unrestricted however rubber must not extend past stock bodywork. Tires must be of radial construction and have a UTQG treadwear rating of 120 or higher. Competition tires prohibited. Space saver tires prohibited.
b. Wheels are unrestricted provided they do not protrude from the body.
4. Engine.
a. Exhaust must include catalytic converters and mufflers. Must be of
reasonable volume and must exit under the rear bumper. Headers are allowed.
b. Intake for this purpose includes everything up to and including the throttle body. There can be no openings made in the body for the purpose of air intake(scoops, ram air, etc). Intake tubes such as they fit the above requirement are unrestricted. MAF meters & throttle bodies are unrestricted.
c. All stock engine accessories must be present and operational (belts may not be removed nor short belts used). Aftermarket pulleys are allowed and unrestricted.
d. Engine modifications (valve covers to oil pan) are not allowed.
e. Supercharger modifications are not allowed. Raised stock-type outlets permitted.
f. Intercooler fans are permitted. Icing of the IC or any other artificial cooling methods prohibited.
5) Transmission and rear end.
a) All stock IRS components must be retained. Gear ratios are unrestricted.
b) Clutch/flywheel must be stock type replacements, torque converters must retain stock stall speeds and function. Shift kits allowed. Line locks not allowed.
6) Fuel:
Pump gas required (max octane 94). No fuel additives or oxidants (nitro or alchohol based) allowed.
7) Computer tuning:
Unrestricted.
Modified Class
1) Exterior:
Same as Street Stock class except that vents/scoops allowed for air intake only.
2) Wheels/Tires:
Wheels same as Street Stock, tires same as street stock except that DOT street legal radial construction competition tires may be used.
3) Interior:
Same as Street stock except that competition seats and rollbars permitted.
4) Engine:
a) Exhaust: Mufflers must be used, no cutouts allowed.
b) Intake: Defined as components prior to and including throttle body. Open and unrestricted.
c)Any pulleys may be used, any belts may or may not be used or modified. Accessories not required (eg. A/C).
d) Engine modifications: Internal modifications allowed. Stock camshaft must be used.
e) 1-M90 supercharger only. Modifications allowed. Inlet and outlet
unrestricted.
f) Any intercooler, tubing, and cooling devices may be used.
5) Transmission and rear end:
a) Trans brake prohibited. All other transmission modifications allowed. Must be an OE type transmission. Line locks allowed.
b) Differentials unrestricted, must retain all IRS components.
6) Fuel:
Pump gas or racing gasoline allowed. No fuel additives allowed, alchohol injection not allowed. Nitrous allowed based on the following. *Vehicle must meet all requirements of Street Stock class with the exception of the use of nitrous.*
7) Computer:
Open and unrestricted.
Pro Street class
1) Exterior:
Same as modified class. Lightweight panels allowed as long as original function is retained.
2) Interior:
Same as Modified class except passenger seats may be removed.
3) Wheels/tires:
No restrictions.
4) Engine:
a) Exhaust system required. No open headers, mufflers required.
b) Intake, accessories, ignition, computer, all unrestricted.
c) Must be 3.8L or 4.2L block, all other engine modifications allowed. Cylinder heads unrestricted.
d) Any form of forced induction allowed.
e) Intercoolers unrestricted.
5) Transmission and rear end. Must be IRS, otherwise unrestricted.
6) Fuel:
Any gasoline allowed. Alchohol injection allowed but may NOT be the primary source of fuel. Nitrous injection allowed based on the following. * Car must comply with Modified Class rules with the exception of the use of nitrous.*
Pro Mod Class
1) Car must be an R code SC/XR7 by VIN. No exceptions. Car need not be registered or street legal.
2) Car must look like an SC/XR7. This includes GFX, bumper covers, roof-line, etc. Body panels may be replaced with lightweight components. Original function need not be retained.
3) Engine must be Ford based.
4) All forms of forced induction allowed.
5) Alternate fuel sources allowed.
Bracket Classes
Heavy Street Class:
True street tires (UTQG 120 or higher). Must be MN12 chassis with Ford power. Buy-back first 2 rounds, $20 each. Winner takes all.
Pro-ET:
Must be MN12 chassis with Ford power. Minumum 13.5 dial in. Entry fee $10, buy back first round only, $20. Winner takes all.
Dyno Rules
The dyno competition will be broken down into 4 classes Street Stock, Modified, Pro Street, and Pro Modified.
Each class will follow the same rules as for the track class breakdowns. In addition to those rules, the following rules will apply on the dyno.
1) Use of NOS (nitrous oxide) prohibited.
2) Each participant gets 2 pulls to produce their max TQ and HP. The maximum numbers will be used. (Example: If the max HP is from pull #1 and max TQ from pull #2.)
3) If the dyno has a malfunction or if the car downshifts a 3rd pull will be allowed.
4) No tuning will be allowed between pulls.
5) Torque converter locking is allowed as long as the person does not change any other transmission or tuning settings during competition (locked for HP and unlocked for torque).
6) A HP spike will not be counted as your highest HP. We are trying to achieve true actual performance numbers. Knowing how to manipulate a dyno and release the throttle at the right moment to achieve a HP spike will not be counted.
1. All vehicles for heads up competition must be an R Code 1989-1990 Mercury Cougar XR7 or 1989-1995 Thunderbird Supercoupe.
2. Any MN12 Chassis may run in Bracket classes only.
3. All classes must meet and follow current NHRA or IHRA safety requirements and submit to track tech inspections. Track tech inspector decisions will be final.
4. All classes are also subject to Shootout Tech inspection.
5. All drivers/participants must be at least 18 years of age.
6. There will be no driver changes allowed after eliminations begin. All drivers must be registered with the shootout. Each car may be entered only once in any heads up class and only once in any bracket class for a total of two entries. Both entries must be seperately registerd with the shootout in advance to the event. There will be no parts changes after eliminations begin.
7. Use of power adders (Nitrous Oxide, Nitro or any of its derivatives) are only allowed where the rules specifically state such use.
Street Stock Class
Any modifications not specifically listed in these rules will not be
allowed.
1. Exterior:
Body kits, wings, spoilers, fender extensions and all other cosmetic body modifications are allowed. Such modifications must not serve any other purpose. All original body panels must be present and function as originally designed.
2. Interior:
Stock interior must be retained. Panels may be modified for any cosmetic reasons but must not be removed. All factory equipment must be retained including but not limited to A/C, radio, power seats, power windows, etc.
3. Wheels/tires.
a. Tire width is unrestricted however rubber must not extend past stock bodywork. Tires must be of radial construction and have a UTQG treadwear rating of 120 or higher. Competition tires prohibited. Space saver tires prohibited.
b. Wheels are unrestricted provided they do not protrude from the body.
4. Engine.
a. Exhaust must include catalytic converters and mufflers. Must be of
reasonable volume and must exit under the rear bumper. Headers are allowed.
b. Intake for this purpose includes everything up to and including the throttle body. There can be no openings made in the body for the purpose of air intake(scoops, ram air, etc). Intake tubes such as they fit the above requirement are unrestricted. MAF meters & throttle bodies are unrestricted.
c. All stock engine accessories must be present and operational (belts may not be removed nor short belts used). Aftermarket pulleys are allowed and unrestricted.
d. Engine modifications (valve covers to oil pan) are not allowed.
e. Supercharger modifications are not allowed. Raised stock-type outlets permitted.
f. Intercooler fans are permitted. Icing of the IC or any other artificial cooling methods prohibited.
5) Transmission and rear end.
a) All stock IRS components must be retained. Gear ratios are unrestricted.
b) Clutch/flywheel must be stock type replacements, torque converters must retain stock stall speeds and function. Shift kits allowed. Line locks not allowed.
6) Fuel:
Pump gas required (max octane 94). No fuel additives or oxidants (nitro or alchohol based) allowed.
7) Computer tuning:
Unrestricted.
Modified Class
1) Exterior:
Same as Street Stock class except that vents/scoops allowed for air intake only.
2) Wheels/Tires:
Wheels same as Street Stock, tires same as street stock except that DOT street legal radial construction competition tires may be used.
3) Interior:
Same as Street stock except that competition seats and rollbars permitted.
4) Engine:
a) Exhaust: Mufflers must be used, no cutouts allowed.
b) Intake: Defined as components prior to and including throttle body. Open and unrestricted.
c)Any pulleys may be used, any belts may or may not be used or modified. Accessories not required (eg. A/C).
d) Engine modifications: Internal modifications allowed. Stock camshaft must be used.
e) 1-M90 supercharger only. Modifications allowed. Inlet and outlet
unrestricted.
f) Any intercooler, tubing, and cooling devices may be used.
5) Transmission and rear end:
a) Trans brake prohibited. All other transmission modifications allowed. Must be an OE type transmission. Line locks allowed.
b) Differentials unrestricted, must retain all IRS components.
6) Fuel:
Pump gas or racing gasoline allowed. No fuel additives allowed, alchohol injection not allowed. Nitrous allowed based on the following. *Vehicle must meet all requirements of Street Stock class with the exception of the use of nitrous.*
7) Computer:
Open and unrestricted.
Pro Street class
1) Exterior:
Same as modified class. Lightweight panels allowed as long as original function is retained.
2) Interior:
Same as Modified class except passenger seats may be removed.
3) Wheels/tires:
No restrictions.
4) Engine:
a) Exhaust system required. No open headers, mufflers required.
b) Intake, accessories, ignition, computer, all unrestricted.
c) Must be 3.8L or 4.2L block, all other engine modifications allowed. Cylinder heads unrestricted.
d) Any form of forced induction allowed.
e) Intercoolers unrestricted.
5) Transmission and rear end. Must be IRS, otherwise unrestricted.
6) Fuel:
Any gasoline allowed. Alchohol injection allowed but may NOT be the primary source of fuel. Nitrous injection allowed based on the following. * Car must comply with Modified Class rules with the exception of the use of nitrous.*
Pro Mod Class
1) Car must be an R code SC/XR7 by VIN. No exceptions. Car need not be registered or street legal.
2) Car must look like an SC/XR7. This includes GFX, bumper covers, roof-line, etc. Body panels may be replaced with lightweight components. Original function need not be retained.
3) Engine must be Ford based.
4) All forms of forced induction allowed.
5) Alternate fuel sources allowed.
Bracket Classes
Heavy Street Class:
True street tires (UTQG 120 or higher). Must be MN12 chassis with Ford power. Buy-back first 2 rounds, $20 each. Winner takes all.
Pro-ET:
Must be MN12 chassis with Ford power. Minumum 13.5 dial in. Entry fee $10, buy back first round only, $20. Winner takes all.
Dyno Rules
The dyno competition will be broken down into 4 classes Street Stock, Modified, Pro Street, and Pro Modified.
Each class will follow the same rules as for the track class breakdowns. In addition to those rules, the following rules will apply on the dyno.
1) Use of NOS (nitrous oxide) prohibited.
2) Each participant gets 2 pulls to produce their max TQ and HP. The maximum numbers will be used. (Example: If the max HP is from pull #1 and max TQ from pull #2.)
3) If the dyno has a malfunction or if the car downshifts a 3rd pull will be allowed.
4) No tuning will be allowed between pulls.
5) Torque converter locking is allowed as long as the person does not change any other transmission or tuning settings during competition (locked for HP and unlocked for torque).
6) A HP spike will not be counted as your highest HP. We are trying to achieve true actual performance numbers. Knowing how to manipulate a dyno and release the throttle at the right moment to achieve a HP spike will not be counted.