Randy N Connie
Registered User
I have been installing a MP FMIC ,for the last month . When I get the time to work on it.I don't like the FMIC mounts to the radiator frame.It looks like the two top FMIC mounting flanges need to be rubber mounted.I found some rubber bushings to mount the FMIC on the top.
My next problem and my question is.The radiator bolts to the MP FMIC.
TOUCHING EACH OTHER.I want to seperate the FMIC from the radiator.
I am looking into moving the FMIC forward about 1'' to 4''.This will give me a space between the radiator and FMIC.And hopfuly help the FMIC run a little cooler by not soaking heat from the radiator.I plan to keep the radiator in
it stock location.I don't run any A/C parts.
I didn't get all the parts when I bought the FMIC new but second hand.So I did not get all the parts to hook up the way MP wants it to be mounted.So its not a problem to make changes.Its going to cost more either way I mount the MP FMIC.
By putting a space between the radiator and the FMIC do you think this will be much help in FMIC temps?I am also going to add some aluminum duct work
for more air flow.
While I am on cooling.I installed a B&M 22000 gvwr TRANS cooler after the radiator with thermastat control on fan.And before the radiator I installed a 20,000 gvwr trans cooler,no fan.I have a Lentech with a 8.5'' convertor with 2400 stall ,non-lock.Do you all think this will work ok?
RANDY
My next problem and my question is.The radiator bolts to the MP FMIC.
TOUCHING EACH OTHER.I want to seperate the FMIC from the radiator.
I am looking into moving the FMIC forward about 1'' to 4''.This will give me a space between the radiator and FMIC.And hopfuly help the FMIC run a little cooler by not soaking heat from the radiator.I plan to keep the radiator in
it stock location.I don't run any A/C parts.
I didn't get all the parts when I bought the FMIC new but second hand.So I did not get all the parts to hook up the way MP wants it to be mounted.So its not a problem to make changes.Its going to cost more either way I mount the MP FMIC.
By putting a space between the radiator and the FMIC do you think this will be much help in FMIC temps?I am also going to add some aluminum duct work
for more air flow.
While I am on cooling.I installed a B&M 22000 gvwr TRANS cooler after the radiator with thermastat control on fan.And before the radiator I installed a 20,000 gvwr trans cooler,no fan.I have a Lentech with a 8.5'' convertor with 2400 stall ,non-lock.Do you all think this will work ok?
RANDY
Last edited: