ThunderGodRacin
Registered User
Looking for information on a good place in Texas to have my eec set up for the mods that I plan on running such as
MPIII blower and 85mm TB 3.5 Air intake
system 90mm MAF 60lb injectors the big exhaust system from SCP /headers 5% jackshaft
and 5% SCPulley UD Accy pulleys a Spec III clutch in a 5spd car w/ 3.55
rear gears.
I just had a complete rebuild on my motor and the heads were ported and flowed to comparable specs as coy miller stage 2 heads.
any ideas?
Thanks
MPIII blower and 85mm TB 3.5 Air intake
system 90mm MAF 60lb injectors the big exhaust system from SCP /headers 5% jackshaft
and 5% SCPulley UD Accy pulleys a Spec III clutch in a 5spd car w/ 3.55
rear gears.
I just had a complete rebuild on my motor and the heads were ported and flowed to comparable specs as coy miller stage 2 heads.
any ideas?
Thanks