Engine Installation With COWL ON/OFF

Cowl On or Removed for Engine install


  • Total voters
    47
Not like it is hard and time consuming to remove. Just take it off and save the chance of breaking it. A few phillips screws, two torx head screws and pop off the wiper arms, unhook the washer lines and you are good to go.. Good time to clen them up good and maybe hit them with some good quality plastic paint (after the right prep work of course....)
 
if its an sc and you did it with the thing still on and didnt break it yur damn good and have small arms and triple joints!
 
Back
Top