------HELP-----I forgot where these wires go........??

1990tbirdsc

Registered User
i just put a new lifter in because the last one collapsed .....and i have this gray connector with a red center and i dont remember where it goes ,,,,,,, it is directly behind my plenum ,,,, and i dont see a connection....soo where does it go ..????
100_5727.jpg



also these 2 lines ...... they look like vacume lines for the guages but im not sure ...... does anyone know where they go ..???? there is a long one and a short one ,,,,,
100_5728.jpg
 
The vacuum line with the 90 degree turn is for the bypass valve on the blower. That other end, i'm not sure.

And yes, that connector is for EGR. It's there even if you don't have EGR.
 
ok ....the erg ....i dont even what that is ,,,, ??? lol...... or if i have one or not ,,,



and the line with the 90 degree turn on it .......does it go to the back of the plenum .because there is a connection there for 1 of them lines .... .????
 
Here ya go.
A pic for your vacuum lines and a link for the egr.
The egr if you had one - goes where the blank off plate is I circled and plugs into the connector. If your 90 is an automatic it didn't use the egr.
link - go down to the flag thread.
http://www.sccoa.com/forums/showthread.php?t=84037

Hope this helps
dbd
 

Attachments

  • 0035-resized.JPG
    0035-resized.JPG
    195.8 KB · Views: 55
Back
Top