C&L MAF tube question

Ronald Wendt

Registered User
stupid question, but which direction does the tube go in the housing?

Tapered end towards the throttle body or the other way around? I asked once before and could not find where I wrote it down

thanks

Ron
 
hmmm....i really dont see how it could make that big a difference. but i'll swap it around.

u may have just solved my problem ryan.

thanks
 
that diameter at the flat end makes a huge difference. The tube funnels the air down the big end to the small end, have it the wrong way and it aint gonna work right.
 
that diameter at the flat end makes a huge difference. The tube funnels the air down the big end to the small end, have it the wrong way and it aint gonna work right.

maybe that y i was running rich and couldn't keep the engine idling.
 
Back
Top