wheel fitment question

[blownbird2]

hey everybody i have a chance to buy these off a friend. 20x10.5 they have the mustang pattern. in the pics u can see how far the stick out but they are just leaning on the lugs. do you guys think they will fit in the well if i do the hub swap. im not a fan of wheels hanging way out of the fenders alittle is ok

[fast Ed]

10" is about it for the rear without it sticking out at all, and it has to be around +40 offset to tuck under enough. What size are the front wheels? No way that size going under front fenders, if they are all 4 the same size.


cheers
Ed

[blownbird2]

the rears are 275's and the fronts he still has i just brought one home to try. i think are 245 8-1'2x20

Originally Posted by fast Ed

10" is about it for the rear without it sticking out at all, and it has to be around +40 offset to tuck under enough. What size are the front wheels? No way that size going under front fenders, if they are all 4 the same size.

the rears are 275's and the fronts he still has i just brought one home to try. i think are 245 8-1'2x20
cheers
Ed

[91BLOWNBIRD]

find out the offset

[bigpoppa822]

They may fit with a fender roll, post the offsets. They should be stamped on the inside of the wheels.

[blownbird2]

offset is +35 front/ +39 rear

[Micahdogg]

Not sure that they will fit "in the well," but they will be close enough. I'm pretty sure the lip will cut into the tire so you'll need to roll the lip or keep some airbags pumped up.