jjklongisland
Registered User
OK, so my car is in the shop getting my clutch put in and for the last two months my steering no longer tightens up when at speed. It is extremely annoying and I hate the way the car handles like this. I think I educated myself in that the way the system works is that at a certain speed a sensor actuates the EVO valve and it basically turns off the power steering stopping the fluid from assisting.
What is the trouble shooting procedure. What do I check first. The plug is plugged in by the steering pump. I believe there may be a module on the rear package tray for this feature. Somehow I believe there is also wiring that comes from the strut tower and is integrated with the ride control??? why i dont know. How can I check if the EVO valve is getting the signal? Any help would be greatly appreciative.
I have heard that sometimes you have to replace the steering rack because there is also a valve in there???? I am so lost and need some direction.
thanks
What is the trouble shooting procedure. What do I check first. The plug is plugged in by the steering pump. I believe there may be a module on the rear package tray for this feature. Somehow I believe there is also wiring that comes from the strut tower and is integrated with the ride control??? why i dont know. How can I check if the EVO valve is getting the signal? Any help would be greatly appreciative.
I have heard that sometimes you have to replace the steering rack because there is also a valve in there???? I am so lost and need some direction.
thanks