Wiseco OE replacement FORGED pistons...*UPDATED 2/20/09* (CLOSED)

[JT's03]

Thanks dave!!
Do you know where I could find a rebuild kit for the sc block?? I would want to replace the bearings,seals and possiblly upgrade the bolts.

[Toms-SC]

Originally Posted by XR7 Dave

so the total package is $800 for the rods and pistons shipped. These are direct replacements for the stock SC rotating assembly. No additional parts or hardware is needed.

That is a fantastic price. Do you offer balanced rotating assemblies? Or; do you find that is even completely necessary if you are not revving the car?

[XR7 Dave]

I have all internal engine parts available. If you would like a complete kit, please email me for options and pricing.

Tom, the pistons are direct replacements with no balancing required. The rods are a little bit lighter than stock and should include a balance on the crankshaft. You could probably run them without balancing but I would not.

Tom, if you want a complete assembly, I have an assembled shortblock here that you could get John to bring back for you. Granted, it has custom pistons in it already which makes it a little more expensive, but it is ready to go.

[Flex]

Dave,


When is John going to be at your place? Perhaps he can bring back my parts also.

Branko

[XR7 Dave]

Originally Posted by Flex

Dave,


When is John going to be at your place? Perhaps he can bring back my parts also.

Branko

Feel free to contact him to make arrangements.

And then lets try to keep this thread on topic, thanks.

[rbrown]

This is looking like a pretty good deal the more I look.

I found KB/Silv-O-Lite pistons in both std and 020 for 35.00 each. Cast plus have to buy rings.

I wanted to do a simple refresher re-build but it looks like that is gonna be tough. Never in my dreams did I think getting pistons would be a challenge.

[Raymondo]

deleted....dumb question :-/

[steve.vreatt]

Are these pistons still for sale and how much for a set?

[Mike8675309]

Originally Posted by steve.vreatt

Are these pistons still for sale and how much for a set?

a new deal with Wiseco to where they have agreed to build an off-the-shelf forged piston for us! Yes, that will be a forged piston in their "Pro Tru" line that will be a direct replacement for the stock pistons which can also be fit to a CAT 5.915" H-beam rod.

thus the answer is yes as these are a shelf part for Wiseco. Pricing will have changed from the group purchase. send an e-mail to XR7 Dave (link in his post) for current pricing and to order.