Rocker Panel Source

[bruce_harbinger]

It looks like this site has rocker panels > http://www.rustrepair.com/repair_pan....htm?r=rr&p=sm

Only thing is, I can't tell if the rocker panels on the SC differed from the LX models? Does anybody know if this will fit?


I have an SC in really great shape minus the rotted driver side rocker. The passenger side is salvageable, but the drivers side is too far gone and needs to be replaced.

[nmcbchief]

Should be the same.

[Tim Groth]

Originally Posted by bruce_harbinger

It looks like this site has rocker panels > http://www.rustrepair.com/repair_pan....htm?r=rr&p=sm

Only thing is, I can't tell if the rocker panels on the SC differed from the LX models? Does anybody know if this will fit?


I have an SC in really great shape minus the rotted driver side rocker. The passenger side is salvageable, but the drivers side is too far gone and needs to be replaced.

The body panels are the same on all 89-97 mn12s.

If you need some rust free metal I have a parts car that I can cut what you need out and ship...PM me if interested. Its going to salvage otherwise.

-Tim

[racecougar]

Originally Posted by bruce_harbinger

It looks like this site has rocker panels > http://www.rustrepair.com/repair_pan....htm?r=rr&p=sm

I have a pair of those very rocker panels available if you're interested.

[S_Mazza]

Bump for a guy who just found a rust hole in the driver's side rocker, under rust bubbles in previously perfect-looking paint.

I am curious about these rustrepair.com rocker panels. If I understand correctly, they are the outer skin only, correct? And how far do they extend? I looked at the picture, and I am not sure it covers everything I need. I need a part that includes the section right near the door hinge pillar, where the rocker narrows and tucks under the A-pillar.

I wonder if I will need a cut-off part to fix this.

Tim, do you still have that parts car?

[Tim Groth]

Originally Posted by S_Mazza

Bump for a guy who just found a rust hole in the driver's side rocker, under rust bubbles in previously perfect-looking paint.

I am curious about these rustrepair.com rocker panels. If I understand correctly, they are the outer skin only, correct? And how far do they extend? I looked at the picture, and I am not sure it covers everything I need. I need a part that includes the section right near the door hinge pillar, where the rocker narrows and tucks under the A-pillar.

I wonder if I will need a cut-off part to fix this.

Tim, do you still have that parts car?

Yup it's still here...and so are the panels.

-Tim

[S_Mazza]

Originally Posted by Tim Groth

Yup it's still here...and so are the panels.

-Tim

Cool. I am hoping to figure out the extent of the damage this weekend. I am still a little sick over it. I will let you know soon if I need the panels.

[Jason Wild]

I have tryed after market panels on other cars and they were not even close to the same good thing it was quick fix to make it last for winter.

[Goldeneagle]

I'll be able to tell you for sure in a few weeks. I'm redoing mine and I cut a nice set out of a 95, and going to be putting them in my 92\93 . I forget what year it is. I only have 3 living brain cells, 2 keep fighting with each other and the third one stays drunk.