3
Reaction score
46

Latest activity Postings About

    • 3
      That exhaust shows up to haunt me again hahaha
    • 3
      35th replied to the thread Lowering Springs install time.
      Unless the Sc's are different as far as removal of the frot strut 4.4 hours seems high it only takes realistically 20 mins on my 97 to...
    • 3
      Rockauto had them a few years ago when I did mine
    • 3
      35th replied to the thread Wheel Bearing.
      Well I'm in luck then cause I don't have auto lights but certainly appreciate the heads up on that
    • 3
      35th replied to the thread Wheel Bearing.
      Yeah I was happy to not hear that anymore. My next task will be the headlight switch, I rarely drive at night but Tues night my...
    • 3
      35th replied to the thread Wheel Bearing.
      Just an update finally replaced the bearings the right side had more play in it for sure the left side I didn't really feel any play but...
    • 3
      35th replied to the thread Crankshaft key?.
      I belive if I remember correctly I got mine at Napa 3 or 4 years ago
    • 3
      35th replied to the thread Power steering pump question.
      I was able to do mine with the tool from autozone without removing the intercooler... Not fun but doable
    • 3
      That's odd... I used the same bolt from SCP on my 90 I also used a bhj balancer not sure if that would make the difference but mine...
    • 3
      I would think it an old line issue and the movement of it being pulled off and put back on etc... Would be the issue and because of the...
    • 3
      35th replied to the thread '90 SC needs a transmission.
      Or look at BBB Complaints pertaining to monster I'm stuck with this hunk of garbage I'll post the link from YouTube of mine 2nd link...
    • 3
      35th replied to the thread '90 SC needs a transmission.
      ABSOULETY DO NOT GET A MONSTER TRANS!! I got one for my wife's 97 thunderbird Lx and put it in from the get go couldn't go over 10...
    • 3
      35th replied to the thread Crank Position Sensor Alignment.
      Mine didn't have a cover behind the HB... I didn't know then it was supposed to. There are 2 5.5mm bolts that hold it on the sensor is...
    • 3
      35th replied to the thread Crank Position Sensor Alignment.
      I'm not sure how to diagnose a bad sensor because when I replaced mine it was because HB broke and broke the sensor as well but I did...
    • 3
      35th replied to the thread One-owner 1990 35th Anniversary SC.
      Beautiful car and good luck with the sell but it may help potential buyers if you listed an asking price... Unfortunately I'm not a...
  • Loading…
  • Loading…
Top