B
Reaction score
37

Latest activity Postings About

    • B
      BKB replied to the thread SC coupler direction.
      solid couplers are quiet, springs couplers will get noisy with age. If your solid coupler made noise then it was not made properly. I...
    • B
      BKB replied to the thread SC coupler direction.
      You are probably the only one in the world with the old spring style. I haven’t seen one of those in 20 years.
    • B
      BKB replied to the thread Itching for a bit more power, MPX?.
      Missing Carlisle has given me some motivation to jump back on this. The family did jump in the wife's Mustang and go to the CJ cruise...
      • IMG_2381.jpg
      • IMG_2382.jpg
      • IMG_2339.jpg
      • IMG_2234.jpg
      • IMG_0916.jpg
      • IMG_8100.jpg
      • IMG_9264.jpg
      • IMG_8460.jpg
    • B
      BKB replied to the thread BHJ dampener 26' ATDC mark.
      Unfortunately I don't know where I had this set before but in the back of my mind I always wandered if it was correct, Michael (...
      • IMG_2378.jpg
    • B
      BKB replied to the thread BHJ dampener 26' ATDC mark.
      I’m really shocked that BHJ did not mark this location. It’s possible I have an early style but after days of looking I have not found a...
    • B
      BKB replied to the thread BHJ dampener 26' ATDC mark.
      I have no idea if it’s early, was a group buy on here.
    • B
      BKB replied to the thread BHJ dampener 26' ATDC mark.
      Mustang and SC use the same timing chain cover. Both dampers have 30k miles on them and neither are spun. Both timing marks are right on.
    • B
      Please tell me what I'm missing here. Stock 94 mustang 3.8 dampener with key stock locking the 2 together and the OEM dampener notch is...
      • IMG_2375.jpg
    • B
      BKB replied to the thread Itching for a bit more power, MPX?.
      So I reached out to DD and he was nice to give me the part # for a replacement chain. I had to take .020 off the back of the double...
      • IMG_2345.jpeg
      • IMG_2344.jpeg
    • B
      BKB replied to the thread Max boost on square port blower..
      Canada, it’s like they want you to be the working poor. Seems it’s time to learn how to weld and fabricate. The MP intakes are not that...
      • IMG_8262.jpeg
    • B
      BKB replied to the thread Max boost on square port blower..
      The MPX case is the same price I paid before trump. Around $680 to my door.
    • B
      BKB replied to the thread Max boost on square port blower..
      Not knowing anything about your car or tune. You will now be making more torque lower in the rpm so at torque peak you might need to...
    • B
      BKB replied to the thread Max boost on square port blower..
      I would run what you have and spend money elsewhere. If you can find a stock 89-93 pulley it’s like a 3% overdrive compared to the...
    • B
      BKB replied to the thread 1994 supercharger.
      Anaerobic sealer is what you want to use
    • B
      BKB replied to the thread Max boost on square port blower..
      The SC needs to breathe so you want to run 4” inlet, slot style MAF, 90mm TB, MP inlet. 20% is a bit much and should just bring the...
  • Loading…
  • Loading…
Back
Top