BLOWN38

I texted Ralph Graul he might be able to help.

Did you bleed the lifters down? If you did make sure you are just hitting the lifter cup before you go the 1.25 turns.

If the compression is even I don't think you have a short block problem.

I also successfully installed the early CF clutch to a late flywheel all you need is the dowels. I found that the alignment dowels for...

The one I put in my car that I got from Clark has the weights on it like your dirty pic. Thats all I recall. On another note. Did you...

Good luck! Get er dun!

Can you see which cylinder is getting coolant in it? Is possible the cylinder bore is cracked, not likely. Also maybe the intake gasket...

You can't just switch the inlet. The hole is a different shape going into the blower. Need the blower with matching plenum. You could...

Sweet! What kinda timing at WOT you got in it? Fab up a front mount intercooler while your are doing the radiator. Oops. reread and see...

Sweet ride!

Stick a screw driver or pliers across the solenoid terminals.

I have 5% all around and 50% windshield. Since its not a daily driver, it was the only option IMO.

Heres my car with 5% and Dad's Marauder with 20% actually it might be 35% on the marauder.

5% for sure! :D I'm biased tho.

35 is usually good to not get too much attention from the police. 20 looks good and still be able to see at night. 5 is great for the...