KMT's latest activity

  • K
    KMT replied to the thread Heater control illumination.
    Note the 4 holes on the unit: The tools are a pair of U-shaped narrow rods that you insert into the holes on each side. These are...
    • 1638464635817.png
    • 1638464709422.png
  • K
    KMT reacted to J dot Miller's post in the thread Coolant and brake leak with Like Like.
    I had mine rebuilt: https://www.sccoa.com/forums/threads/rebuilding-thermostat-housings-and-replacement-flanges.140906/
  • K
    KMT replied to the thread Heater control illumination.
    Hih...something isn't right ;) This is my '90 Anny: ...you can pull the fan speed knob off to inspect that part, but not much to...
    • 1638381972975.png
  • K
    KMT replied to the thread Coolant and brake leak.
    Getting the thermostat housing to reliably seal is a known issue. Any work done lately? Solutions include careful cleaning and lightly...
  • K
    KMT replied to the thread Remote unlock.
    And while we're on the topic, an FYI for those not yet aware - after you unlock the driver's door using the keypad, immediately pressing...
  • K
    KMT replied to the thread Remote unlock.
    My '90 SC has an aftermarket alarm w/fob that will lock/unlock doors and pop trunk. I added a single gas lift to the trunk so it will...
  • K
    KMT replied to the thread power steering pump.
    I got my last SC/EVO-centric ps pump from AutoZone, with the reservoir, but without the EVO, which I moved over from the old one. If the...
  • K
    KMT replied to the thread Stumped on head gasket symptoms.
    Same heads? Crack checked/inspected? Just get your hands on a combustion tester...AutoZone, as an example, free-rents a kit you can...
  • K
    KMT replied to the thread Code 49.
    Works for me.
  • K
    KMT replied to the thread Code 49.
    The paste is just doing it's job, assuming you've used the right compound. Keep in mind the pedestal is warmer than the DIS, which...
  • K
    KMT reacted to 35th's post in the thread Super What? with Like Like.
    This would be the Grimace mobile
  • K
    KMT replied to the thread Teves gasket part number.
    ...pls. see my edits, thanks.
  • K
    KMT replied to the thread Teves gasket part number.
    Photos help a lot, thanks. Nothing jumps out that screams fail, disc looks ok, filter looks to be oriented ok. O-ring looks ok when...
  • K
    KMT replied to the thread Teves gasket part number.
    ...what position is the plastic filter ring in? Not flipped, is it?
    • 1637202396710.png
  • K
    KMT replied to the thread Teves gasket part number.
    I assume you're talking about the square-shoulder rubber o-ring... I've tried to source those, and came up dry. Not sure it would let...
    • 1637201367233.png
Top