M
Reaction score
3

Latest activity Postings About

    • M
      m00k_ replied to the thread High-ish idle problem..
      Another interesting thing I've just realized. This throttle body is the mp 85mm. And both the Inlet to the back of the sc and the sc...
    • M
      m00k_ replied to the thread High-ish idle problem..
      Here I am, throttle body removed. Is this amount of gapping normal? Also noticed that the throttle blade rubs so much on the bottom...
      • 1000001519.jpg
      • 1000001520.jpg
    • M
      m00k_ replied to the thread High-ish idle problem..
      In previous testing I did try adjusting the throttle plate screw and noticed that the screw was only barely touching and backing it off...
    • M
      m00k_ replied to the thread High-ish idle problem..
      I had some time this evening to do some more investigating. Car reads 15in of vacuum at idle in park, and 10in at idle in gear. I...
      • 1000001518.jpg
      • 1000001517.jpg
    • M
      m00k_ replied to the thread High-ish idle problem..
      I let the car sit in the garage for acouple months during the snowy season here as our snowy salty roads are notorious for creating...
    • M
      m00k_ replied to the thread High-ish idle problem..
      Same car Doug, replacing the fuel pressure reg seemed to have solved the issues I was having. No more hard starting, no more...
    • M
      m00k_ replied to the thread High-ish idle problem..
      The only thing I've done since I bought the car a few months ago was change the fuel pressure regulator as it was going bad, but the car...
    • M
      Idle quality is good, steady and smooth. No surging or stumbling but idle speed in park is ~1300 cold and 1000 at operating temp. In...
  • Loading…
  • Loading…
Back
Top