ricardoa1

Are you sure you are not breaking down the led bulb enough to install the ring. Mine were two piece, but came in one piece so it looked...

high res non potato version

At least you are wearing your seatbelt. Safety!

For those who don’t have Facebook, just putting some pics of what I’m working with. Radiator is a two row with two 1” tubes, it’s...

Still debating, and it is someway experimental, I don’t have an oil temp gauge. There is a port on the sandwich adapter I believe can be...

Apples to oranges but I know how you feel. The Terminator swapped Mark VIII I used to own would heat soak on hot summer days and 220...

Going to also start building an engine oil cooler, this is the thermostatic oil filter adapter plate, it will open at around 170f. It...

Ordered some Chinese sandwich tonight.

An interesting point on the balance sleeve is that it’s good at the track since it does bypass some coolant, imagine after a cool down...

Thanks David, The MR gasket one appears to be a balanced sleeve type, the original design is a poppet type. I can’t prove one flows...

Cross flows tend to be longer, but if same core size they should be the same. There are different designs in the aftermarket. Double row...

That aluminum looks custom as it’s wider than stock. And horizontal as you pointed out .

Aftermarket after a while stopped the 94 production. Yea the early ones for minus your observation. Unless griffin most came with the...

Thank you David but not sure what the part number would be for that. The pictures are not clear online cause they are generic. On your...

Thank you all. Seems there is about a 15-20 degree difference to full open. At average temps of 220f both should be fully open but maybe...