Search results

Does no one have this long lost information on how to complete this?

I am unsure on that but my car is a Canada car and it did have a EGR when I got it

Good Morning Everyone, It is that time again for me to seek more information from you guys that I cannot seem to find. After 2 days of hunting around on the forums I find plenty of mentions about hooking up the analog output form a wideband into the cars computer EGR pin if it was deleted so...

Yeah when it comes to a massive list like that it is best to start setting everything back to stock and repairing any damage if you are heart set on restoring the car. It is a bit of a laundry list. the sensor I had mention might not even be bad if the wires running to it have been damaged...

You might be having multiple issues but this was similar to something i experienced. There is a coolant temp sensor on the top of the engine that might be your issue. When you start and run your car do the rad fans come on at full power? Your no start can be replicated by others with good cars...

Charles just got back to me and he recommended 15ftlb max for the MPX. I had assembled everything yester and found the my SC was leaking oil every where. Upon inspection I found my bottom bolts on the snout have a slight gap between the heads and the snout. Going to pull everything apart and...

Yes my TB was smaller than the opening so we left it. I have been digging around and attempted to email Charles from MP to find the torque spec for the front snout bolts that tie it to the case. I know the case is aluminum and I do not want to pull the threads out. From what I have seen, there...

Hey Everyone, For those who are familiar with the end of the MPX plenum that connects to the TB does this look correct? It looks like two different sized halfs were used to make this. The right "half" is clearly smaller and off set. Any input?

Hey, if you are still fighting the no start issue humor me, next time the car will not start hold the gas pedal to the floor and see if it will catch and fire. if not ignore me and move along to your next test.

Hey that's perfect to hear, saves me the trouble of cutting a belt down from 12rib to 10

I was under the impression there was no 10 rib compatible belt, if this is a direct swap that will not be too long and slip I am going to grab one

Ok, so might just be a weird naming thing. I am moving form a late model s-port with MP coated rotors to an MPX with MP coated rotors. with just a case swap any idea what kind of uplift in boost I might see? Also a little off topic I an looking for a replacement 10rib SC belt. From what I under...

I am familiar with an S-port but in this thread https://www.sccoa.com/forums/threads/m90-mpx-s-dyno-verified-400hp.133251/ they talk about an MPX-S and a MPX so i am trying to understand the difference

Hey, I have looked around and seen mentions of both the MPX and MPXs but I could not figure out if there is a difference between them or if they are the same thing. Thanks in advance!

Hey I will always go for the easy test firs! I will be dragging the car out soon and will have to attempt to rebleed everything. Will update if it works.

This is the exact same thing I have to do with my car. I have a center force and an aluminum fly wheel. When working on my car I do not believe I shimmed the slave and have not jacked up the car to check if my wheels spin. I will be keeping an eye out here to see what solutions are found.

Dave tuned it so just full send it? That is what I like to hear!

Hey, No the car has a customer FMI and is also running on Water/Meth. As for the temps though it it has not been measured. I left out a few fair amount of mods as the list is on the longer side. I have not spoke with Charles and a smoke test is planed for after the swap is all wrapped up to tie...

Good Afternoon Everyone! On my list of thing for my SC this year is possibly an MPX. What I am looking for is anything that i need to be aware of before switching to it. Currently I have an s-port late model, 15%OD(10% SC 10rib / 5% JS), MP rotors, 60lb injectors, ported head/cam amongst...

I do have a friend a bit of a drive away from me that has a set installed on a car I believe so I might end up going out there and testing them to find out. If i get my answers I will post back here.