Search results

I approve of the hood choice :)

If I recall, fold down cloth seats were only available on the XR7.

Retrobrite. Basically hydrogen peroxide solution in the sun or under UV lights. Lots of good Youtube videos on it.

It's looking a lot better now! The paint is pretty much dead, especially with all the cracks in the hood.

The dash cap isn't a perfect fit, but pretty decent. It's just sitting on top of the original dash in the picture above, not glued down yet.

I just received a dash cap from Carparts.com to fit the sliding tray. My interior is titanium and the dash cap is black, unless you pay more. I figured the gray options they had wouldn't match anyway, so got the cheaper option. I'm tempted to install it as is. What do you guys think?

Thanks! That's the last remaining functional issue I have (other than the AC, which might be plugged). Once I have the speedo working correctly, I can concentrate more on cosmetic issues. The gauge doesn't jump, stays fairly steady, but seems to wander up and down some.

Thanks! I bought a 6 pack just like that off eBay. I finally got the 6th mangled clip out today. Hopefully I can see better at night with the new lights :) The top tab broke off both lower clips, making it difficult to grab them to pull out, once the side tabs were loose.

I know this is an older thread, but is there any chance of another group buy on these brackets?

Thanks, those don't have the retaining clips though. I wish mine were this easy to remove!

Well, I bought some ring pliers, eventually got 5 of the 6 clips off. Driver's side lower clip top broke off and I can't get it out. 90 degree tip broke off of the new pliers, so I guess I'm exchanging that. Any tips on how to get the lower clip out when the top is broken off? It's hard to...

This thread is for the general discussion of the item My '89 SC. Please add to the discussion here.

Thanks! Should I just break them all off and replace with new ones, or is there a good way to get them out without breaking? I ordered a pack of these either way, in case more break.

I am trying to replace my badly yellowed headlight lenses. What is the recommended method of removing the headlight assembly clips? I tried to get one out with 2 flat blade screwdrivers to pry the lower tabs out and pull with pliers, but the top of the clip broke off. Is there a replacement...

Temp gauge fixed, 1 more issue down. It was the Coolant Temp Sender for the temperature gauge. Easy fix there. Now to tackle the speedometer and AC, which also quit working.

Well, the AC/Heat fan issue is now resolved thanks to the help here! I guess this needed to be replaced. 1 spring was broken/rusted off. Half of the white retaining clip broke off removing the old piece, but it seems to be snug enough with the other side still holding it. Rain started, so I will...

I just got the headliner recovered, looks great! I still have to get everything buttoned back up and figure out how to get the sliding panel back in place. They recommended against trying to recover the visors, saying the lighted mirrors would likely shatter trying to pull it apart.

Visors or switch bracket?

Thanks! Ordering it now.

Thanks! Hopefully I can dig into it again this weekend. If the blower issue is the resister, does the whole module need to be replaced, or can I just replace the resister?