Search results

Mr Steve congratulation, this is a very nice car - enjoy it. The car found a new home in Tulsa OK.

Hi Steve, I still have the car; in two weeks planning on ebay. Feel free to give ma a call at 419-855-2811.

bump

Bump, $7,500

Uploading photos from the engine

reply Hi Bill, I will reply to your email.

Additional Photos More photos

Hi, there are some changes in the family and unfortunately I have to sell my car. It is a very nice car, with very low mileage and I have been working to keep it all original. For me it is the nostalgia that remembers my dad cars, and I did an extra effort to keep the car like if it is rolling...

Servo I used a vacuum generator, I was able to retract the diafragma, but after 2-3 sec, it doesn't keep it, it returns to its original state. I am not sure about the pedal, if the switch is correct or if there is a way to test it? should the servo retain the vacuum?

Servo Today I checked the Servo. I removed the linkage at the throttle and checked the servo. The servo looks fine. I checked with an ohmmeter and the reading are correct (for the parameters, I documented it at the beginning). The vacuum hoses, the black and red (B/R) has vacuum power...

Break Pedal Last week, I retook the activities and thanks to all the inputs. I checked the brake pedal and even when I was not depressing the pedal, it was not depressing the switch; I am guessing the valve was open. I already adjusted it (below images). Today I will follow tberger06 and check...

Thanks Dave Thanks Dave, I took my car to a shop, to take care of multiple things such as: brakes, AC, tensioners and idle issue. The gentleman has been working with Fords for many years and he fixed the car by replacing the Fuel Pressure regulator. Your advise was on the money!

I have a good CCU that I bought when I was troubleshooting my AC problem. It is in good condition, I tested it in my car. $50

Clip Hi guys, I primarily looking for the clip. Hopefully if you don't have the full system, you have just the clip. thanks.

Hi I am looking for a Vehicle Maintenance Monitor for a Thunderbird 89-93. Any conditions, I am mainly looking for the side clips.

Dallas I would like to recommend Mustang Service Center, 3613 Live Oak St, Dallas, TX 75204, (214) 824-6716. They did an amazing job on my car. Craig has been working on this car since the 90's, while he was working at the Ford dealership. He knows them very well...

Thanks rbrown, I will the review the 88 MC. The following thread describes the cubic inches of fluid for 1 inch of brake pedal travel. On a 1989-1992 SC, to move .7cubic inches of brake fluid, you have to move the master cylinder 1 inch. If you replace the master cylinder with one with a 1"...

Proportioning valve Hi, I took me 2 days but I have gone to this thread. Unfortunately my ABS broke last week and I am not sure if I should sent it to supercoupe for remanufacture or replace it. In terms of the MC I am choosing the Crown Vic,but the Proportioning valve is not for sale (I...

Hi KTM about your questions -- Yes, the tensioners have their ears. -- I put them back in the car and took some pictures. I already bought the tensioners from Rock Auto. Unfortunately they will arrive next week. I followed Sam Jones recommendation, and found in Rockauto the two...

and if the belts are different, how to check the pulley. I checked the belts and I think they are in parameters (0.1 - 0.2 inches bigger). PART NUMBER | METRIC Part NO. | NO RIBS | EFFECTIVE LENGTH | OUTSIDE LENGTH...