Search results

  1. T

    Members in Alaska?

    Just moved up here this summer. Looking to get with SC owners here. Am in the Wasilla area. MikeH
  2. T

    The New And Improved Sccone Member List

    Moved to the other side of the country! talonhead - Mike Handley - SE-CT - . It was to communicate with the folks on here while I was in CT. About 40 minutes north of Anchorage, AK. Haven’t seen any SC’s here yet. But, Ram Megacabs and H2’s (I have one of each along with my...
  3. T

    big block install

    I posted this on the other bbf thread Haven’t decided to go with front or side throttle, so no top.
  4. T

    DIY Supercharger Plenum Nut Spanner Wrench Files This is similar to what I use.
  5. T

    Bringing a few parts with me to VC

    Stopping in Oxnard, Ventura County in about 2 weeks. Have a custom aluminum radiator that was in my ‘93 and a McLeod bell housing for T-56 swap on V6 and push rod sbf’s. Bell housing was used for setup only. Shifted to bbf/T-56. Radiator is 3” thick 2 rows of 1” tubes and fan guard using OEM...
  6. T

    Moving need to get rid of a bunch of parts - mostly NIB

    Only things left is the bell housing and radiator. Leaving Friday, heading to CA before AK.
  7. T

    Does a big block really exist,? look on....

    Well it’s not running yet, and I’m almost ready to move, but I thought I’d post a pic.
  8. T

    DIY Supercharger Plenum Nut Spanner Wrench Files

    Get a spanner wrench like they use on fire hoses and grind the hook to fit the grooves. That’s what I have. We used the same style in the shipyard for waterside electrical connector ‘nuts’, both types have a hinge in the middle for use on a certain size range. Just for those that don’t have...
  9. T

    Finally pulled one of the heads off! So I have questions:

    DON’T reuse your head bolts! That are 1 time use. With the stud kit it’s all good. When I blew the left side gasket, i had to replace it twice! This was before I got the studs, so that a couple of sets for the whole job because I removed both heads and cleaned up. Had to take them to have them...
  10. T

    Improving cooling, better aux rad or removing oil cooler lines to its own system?

    Hey Recardo, got an custom aluminum radiator by mike38sc years ago. Was on the car for 3 years. Fabbed a fan guard using the OEM fan. 3” thick with 2 rows of 1” tubes. Had to put cardboard in front to maintain temperature. I’m leaving CT end of this week though. Pm me if you think you want it...
  11. T

    ‘93 SC Parts for sale Southeast CT Updated

    Found an ARP head stud kit to add to the pile.
  12. T

    Moving need to get rid of a bunch of parts - mostly NIB

    Make a deal for someone willing to come to Southeast CT. Lots of new engine rebuild parts. T56 conversion parts: McLeod SC clutch & pp for LS1 T56, McLeod SBF/V6 to T56 bell housing. Custom radiator by old member Mike38SC with OEM motor/fan in stainless Shroud that I fabricated. SC flywheel...
  13. T

    OEM flywheel specs

    It is used. Came off my ‘93 SC. Was resurfaced a couple of years ago, never reinstalled. Been sitting in my furnace room gathering dust. Wanna make a trip to CT? Gotta be in the next week or so. Cuz as soon as both houses close, I’m outta here!
  14. T

    OEM flywheel specs

    Thanks for the info. Now maybe I can get rid of it
  15. T

    ‘93 SC Parts for sale Southeast CT Updated

    Moving soon. Need to unload a bunch of parts 93 SC Parts for sale Southeast CT Updated Getting ready to move. Have a few parts cheap for those willing to come get them or meet me part way. All related to ‘93 SC 1. M5R2 GONE 2. AOD GONE 3. Engine (auto) assembled long block. Supposed to be a...
  16. T

    OEM flywheel specs

    What is the number of teeth and is there an offset weight? MikeH
  17. T

    2020 BBF/T56 . . . Back to work

    Clue: States Motto “The Last Frontier”
  18. T

    2020 BBF/T56 . . . Back to work

    Coming to the end of the year. . . Well as we come to the end of the year, looks like I’ll be retiring again. Spent the end of last year and most of this year recovering from work injuries and trying to get my house fixed up to sell. Hopefully, will be out of New England by Christmas. Hate...
  19. T

    2020 BBF/T56 . . . Back to work

    More progress http:// More pics. All runners drilled. Now to set up the jig to set in the bungs. MikeH
  20. T

    2020 BBF/T56 . . . Back to work

    Updates pics of top end bbf Top end parts- heads, intake, plenum Starting BT intake modification to efi Received my rolls of copper-nickel fuel lines. Working on car when it’s late or raining. Otherwise, I’m at work...