Search results

  1. J

    Trubendz downpipes

    double checked and pipes match the pictures. i ordered the 2.25, they also sell them in 2.5 either way thats alot bigger than the manifold.
  2. J

    Trubendz downpipes

    It mentions gaskets in the desciption on the website, the flare on the pipe is much larger than the manifold. Something is needed to make up the size difference.
  3. J

    Trubendz downpipes

    I bought a set of downpipes for my 89 SC from Trubendz and never got the gaskets, anyone know what the part number for the donut gaskets is? I tried contacting him several times and have gotten nowhere. I have also tried several Walker part numbers and nothing seems to fit well.
  4. J

    1990 SC will start then immediately die

    what about the ground behind the fuel rail, that ground is just for the injector harness. I would also use that harness to check the resistance of the injectors. I have had a few injectors fail over the years and it will drive you crazy.
  5. J

    89 clutch pedal

    looking for a 89 clutch pedal shipped to 01529
  6. J

    parting out 2 1990 supercoupes.....

    so what about a price with whatever parts you would include them with
  7. J

    parting out 2 1990 supercoupes.....

    I am looking for a set of the brackets that are riveted to the rear quarter and hold the body molding. How much plus shipping to 01529?
  8. J

    Custom gauge cluster

    you're right about the view being limited. now that i've seen what you've done, i'm thinking of trying the same thing. I will try painting the bezels black. the b terminal is not on the dimmer, the lighting circuit is seperate.
  9. J

    Custom gauge cluster

    that is correct. i actually took the gauges out of the cups and put them in the cluster with very little modification.
  10. J

    MA state inspection

    safety check only for 96 and older
  11. J

    helpp need to find a new rag joint

    there won't be a direct replacement, but i know for a fact that you will find the new rubber in the HELP! section. I think they're dorman parts.
  12. J

    Rear Wheel Bearing Replacement

    I have used both 20 and 12 ton presses on these. The best way I found was to heat the whole hub with the bearing in it to about 200 degrees(I used my oven). You still need the press but it slides right out. I usually leave the new bearing in the freezer for a couple hours and install it while...
  13. J

    Valuation

    I went to a car show a couple years back with my 89. When I pulled in they put me next to a 93 notch with a turbo. Needless to say there was a crowd around the Mustang and the Tbirdy got no attention. Anyway, a guy pulls next to me with a Viper. He gets out and immediately starts talking to me...
  14. J

    Suspension Bushing Questions...links included

    The moog bushings are much stiffer, better road feel. The tradeoff is they are require more maintenance.
  15. J

    Suspension Bushing Questions...links included

    For the strut rod bushings I use Moog. I have to change the frame side every 3 to 4 years, but they are lifetime warranty. I put about 10,000 miles a year on the car.
  16. J

    1990 SC won't pass RI state inspection

    I would check the ect on the manifold, if it's bad the car will run really rich because it will always think the engine is cold. I know the Haynes manual has the resistance specs.
  17. J

    Mustang mufflers?

    i recently put on a set from an 07 and they sound good. no drone to speak of. it's pretty quiet at idle and has a low rumble when you get on it. these are a lot of work to get on though. i had to cut off the rear tow points because they are very wide.
  18. J

    Autometer Gauges Inside Stock Cluster

    they are 2 1/16, i did not try the boost because i did not have one. i can tell you that would be a real challenge because it is connected to the fuel gauge. the gauges went in almost too easy. when i pulled the autometer gauges out of the pods i was surprised to see how similar they are to our...
  19. J

    Autometer Gauges Inside Stock Cluster

    I picked up some carbon fiber gauges on the cheap from craigslist to try an idea I'd been kicking around. What do you guys think.
  20. J

    Seat belt and ding´s

    it has been years since i removed mine, but i believe it is behind the glove box.
Back
Top