Ryan A Harris
Registered User
Hey everyone!
I’m running into an issue with a ‘95 & the MP front mount IC.
I’m replacing all the old couplers & old clamps that hold each IC connection. I have found that this set up needs a coupler with a bend in it. It’s the connection from the lower IC into the lower intake.
Curious what others have used for this set up.
Thank you in advance.
I’m running into an issue with a ‘95 & the MP front mount IC.
I’m replacing all the old couplers & old clamps that hold each IC connection. I have found that this set up needs a coupler with a bend in it. It’s the connection from the lower IC into the lower intake.
Curious what others have used for this set up.
Thank you in advance.
